Jump to content
SAU Community

Recommended Posts

just the other day i noticed a loud hissing sound on my R33 coming from the turbo area..

i thought it might have been a leak on the turbo to dump pipe gasket, so i took the dump pipe off and applied some gasket maker on the gasket.. i put it back together and took it for another spin and im still getting the same noise..

it cant be a leak in the intake piping as the car wouldnt run properly..

the noise comes on as soon as i hit boost and rev it over 3500rpm, it sounds heaps louder than it should, almost as if there is an exhaust leak.. the car pulls good, but im just curious as to what this noise might be?

any help would be appreciaited?

turbo is HKS 2530kai

Edited by MKDR33
Link to comment
https://www.sau.com.au/forums/topic/121495-weird-noise-from-turbo-area/
Share on other sites

Manifold gasket if the car is "louder" than normal.

One of the more common maintainance problems

If you get right in there its probably coming from the manifold-->block

Failing that the dump still isnt sealing, but bets on for the one above first

im hoping to god it isnt that, as i have replaced it like 3 times already, and they arent cheap(around $120).. im gonna have to take off all the piping tommorow and have a look..

if the turbo to manifold gasket is leaking would it make a similar noise?

lol.. yeh i installed it correctly, its just that ive had 3 faulty manifolds so far..

my last 3 manifolds were aftermarket ones and they kept on cracking near the flange where the turbo sits.. people suggested it was faulty engine mounts that caused it, so i had to weld some supporting frames around there to hold it properly..

anyway, this is why i dont think it would be that particular gasket, as its pretty new, although ill check it out tommorow along with the turbo to manifold gasket..

you think it might be something to do with my BOV venting air?

Edited by MKDR33
im hoping to god it isnt that, as i have replaced it like 3 times already, and they arent cheap(around $120).. im gonna have to take off all the piping tommorow and have a look..

if the turbo to manifold gasket is leaking would it make a similar noise?

had the same problem 2 times now and each time it was the same thing.

exhaust manafold to turbo. the bolts come lose there if you have changed the turbo or gasket at anytime. the little metel tabs there that stop the bolts from coming undone (did you put them back on when you replaced the turbo?) are ment to be replaced if you ever replace a gasket, or they will work there way lose after a few months, and burn through your gasket.

exhaust manafold to turbo. the bolts come lose there if you have changed the turbo or gasket at anytime. the little metel tabs there that stop the bolts from coming undone (did you put them back on when you replaced the turbo?) are ment to be replaced if you ever replace a gasket, or they will work there way lose after a few months, and burn through your gasket.

ive experienced this problem in the past also.. i forgot to put the metal tabs back on, and one day i noticed the 2 bolts were missing.. ill double check that tommorow aswell though..

Edited by MKDR33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - there is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
    • Yeah man, absolutely. You can try pushing me all the way in swapping the R34 for an E9x M3 
    • It's almost certainly going to be some amount of pads compound transfer onto the rotors. It will probably go away after you've run them for a bit. If not, pull it all out, lightly sand the rotors, scuff the pads, and rebed.
    • no one recommending speedtek gearsets?   i'm in the same boat as Cosline but rwd, I am holding boost back in third to 600nm at the hubs to save the gear as i make nearly 750nm at the hubs on a mainline
×
×
  • Create New...