Jump to content
SAU Community

Recommended Posts

Yes this is going ahead with some changes to last year. Calder has confirmed 4 Wednesday night practices so far, these are:

June 28

August 30

September 27

October 25

We are in talks about the possibility on weekend events in the evening.

There will be tempory tyre barriers installed on the edge of the track at the Entry of turn 1 of the Drift Nats track, and also these tyre barriers will be installed on the left hand side of the track under where the bridge use to be and also on the outside exit of the last turn coming onto the drag strip. So if your going to spin your going to want to try and keep your car on the track surface or Spin to the inside of the corner.

Entries will most likely be capped at 70, and not knowing how many new drifters are going to appear with the release of the Fast & Furious 3: Tokyo Drift Movie, so i would highly suggest getting early or pre entering through VicDrift for these events. Entry will be $90 and $20 for spectators.

The Victorian Drift Club Rules and Regulations will apply at these Calder Park drift events. So anyone that has not been to a VicDrift event this year i suggest you have a good read of these.

Victorian Drift Club Rules And Regulations 2006

Drivers will also have to be on there best behaviour as we need to build a good relationship with Calder park so that we do not end up in the same situation as we were 6 months ago, where Calder Park had no intrest in holding drifting at Calder Park again.

So spread the word and get some spectators out there with there Winter/Ski gear, so that we can hopefully get a weekend evening event happening.

Also i would like to see drivers and spectators still making the effort to get to Winton Raceway for our Practice days as Winton is a better track for drivers and spectators.

Cheers Luke :)

Link to comment
https://www.sau.com.au/forums/topic/121612-drifing-is-back-at-calder-park/
Share on other sites

^ think that was an issue between calder and Fullock (group that used to run the drift events, Victorian Drift Club is now doing it) plus a concern that too many ppl were dropping thier wheels off under the bridge ripping up and damaging the side of the track, which now seems a compromise has been made with the tyre barriers. Could be rather interesting to spectate..hmm :dry:

Its was bob janes issue, nothing else.

I wouldnt be surprised if it disappears again once the F'n'F hype dies down.

Bob is more than likely just trying to cash in on the "latest" craze more than anything else... pretty much how he works.

And then it will die another death

Sounds like theyve gayed the layout up...

No more dropping the tyre off the track means uber shite linkage under that bridge which means YAY back to the old slow crappy of Drift Nats 1.

Not to mention the amount of people that will now take it a lot easier into the 1st corner... newbies need that security when attempting to make a high speed entry. Wiping outs how you learn the limits of your car.

BUT its better then nothing!

I need to inform you Guys and Gals that Vicdrift has been told by Calder Park that they will be running the track themselves with out our assistance. This is not our choice in anyway!!

What we can tell you is that i do not intend to run the begineers section at the bottom end of the track.. They will run beginners sessions through out the night on the main track with a shorter start line.

To our knowledge there will not be any tutors for begineers that are drifters..

If you guys have any questions about the Calder Park practice nights you would be best to contact Calder Park by email or phone.

Email: [email protected] or [email protected]

Phone: 03 9217 8800

Or take a look at there website for info.

www.calderparkmotorsport.com.au

Cheers Luke :sorcerer:

Edited by Lukeyz

That is great news and it's something we should get behind if we want it to stay. I don't think it is a F'n'F hype thing because I've loved watching drifting since I saw it for the first time. It's a sport that people enjoy watching and doing no matter what the latest thing is.

Bummer about the tyre walls! that will probably put some people off driving.

If we get behind it maybe Bob Jane will see that there is some money in it for him and fix up the place! Bring back the thunderdome!!! :(

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...