Jump to content
SAU Community

I Want A Good Skyline

DaFuca
 Share

Recommended Posts

DaFuca Enthusiast

DaFuca

Posted
Posted

Hey guys,

I'm looking to get an R33 GTS, But I honestly dont know wha to look out for as far as a good one.

I have around $25K to spend, but I would like something low k's very clean, and not been driven hard.

Can someone help me with some info on what to look for? how much a good GTS will set me back and what mods i can do for stuff all cash to get the best out of my RB25DET?

Link to comment
https://www.sau.com.au/forums/topic/121666-i-want-a-good-skyline/
Share on other sites
R33S2 Grand Master

R33S2

Posted
Posted

Buy your car in japan, the series 2 R33 are the better buy imo.

Look at the for sale section in your state/area for teh bargains, research this site for what mods are best for your intentions.

The group buys are some of the best deals going for new stuff.

RANDY Veteran

RANDY

Posted
Posted

Yeah, be careful if you're looking a "GTS" is a non-turbo, but you said that you want a good RB25DET (turbo).

So you're looking for a GTST. For 25K I think you could get a 98 Series 2 40th anniversary edition for that money, or a decent R34GTT manual. I think the R34 will hold its value more though, being a newer car.

Do what Satanic did, and call an importer, and tell them to look for a perfect condition R34GTT, and to email you with pics and the auction-sheet when they find one. You'd want it for about 22K delivered and complied, so you can rego and insure it with the remaining 3K.

DaFuca Enthusiast

DaFuca

Posted
  • Author
Posted
Yeah, be careful if you're looking a "GTS" is a non-turbo, but you said that you want a good RB25DET (turbo).

So you're looking for a GTST. For 25K I think you could get a 98 Series 2 40th anniversary edition for that money, or a decent R34GTT manual. I think the R34 will hold its value more though, being a newer car.

Do what Satanic did, and call an importer, and tell them to look for a perfect condition R34GTT, and to email you with pics and the auction-sheet when they find one. You'd want it for about 22K delivered and complied, so you can rego and insure it with the remaining 3K.

Sorry I thought that the GTST was implied when i mentioned RB25DET, my bad.

I really wanted an R34 GT-T, but i also wanted a good starting point, Much like what Fooey e-mailed me the details with, but something newer. And i want something as close to 250 kw for around the $25k. that is why i downgraded to the idea of an R33, RReally want something like an earlie 1998. But i am not sure if I can get an 1998 R33 GTS-T to put out around the 250kw for that kind of money.. It is why I came to you guys for advice.

Really looking for something as a work horse but has be low k's and very reliable, also something that with a little bit of mods, can easily slip into drifting.

ignuz Mentor

ignuz

Posted
Posted
Sorry I thought that the GTST was implied when i mentioned RB25DET, my bad.

I really wanted an R34 GT-T, but i also wanted a good starting point, Much like what Fooey e-mailed me the details with, but something newer. And i want something as close to 250 kw for around the $25k. that is why i downgraded to the idea of an R33, RReally want something like an earlie 1998. But i am not sure if I can get an 1998 R33 GTS-T to put out around the 250kw for that kind of money.. It is why I came to you guys for advice.

Really looking for something as a work horse but has be low k's and very reliable, also something that with a little bit of mods, can easily slip into drifting.

With an r33gts-t It's going to cost you a bit to keep it reliable at 250+kw... I'm Not saying it won't be reliable, but, you will need to invest quite a bit into it, e/g running costs, parts, fuel. I just don't know what you mean by work horse either? If you mean like as a work car, I think you should just buy a daily, then get something a little cheaper as a weekend, fun car.

DaFuca Enthusiast

DaFuca

Posted
  • Author
Posted
With an r33gts-t It's going to cost you a bit to keep it reliable at 250+kw... I'm Not saying it won't be reliable, but, you will need to invest quite a bit into it, e/g running costs, parts, fuel. I just don't know what you mean by work horse either? If you mean like as a work car, I think you should just buy a daily, then get something a little cheaper as a weekend, fun car.

Ok so what do you mean as far as parts that i will need to upgrade if i was something to be "Reliable" at 250 kw

DaFuca Enthusiast

DaFuca

Posted
  • Author
Posted

Na im not after a race car that hasnt been raced.. and yes there would be cars out there that havent had the balls hammered out of them.. I just want something that has a good history, and that has low k's....

yeah and i will be sure to get it checked out, but this is totaly off topic to what i asked for.

Information on how to get a R33 Series 2 GTS-T skyline to put out around 250 rwkw.. is it possible for under $25,000 and what do i need to do to make it possible?

EMZ R33 Community Regular

EMZ R33

Posted
Posted

Ive been looking around for R34 4 doors and i tell you what, in Sydney and wa they are going for around 17,000 - 25,000 pending on kms and mods. Try www.carmenimports.com or www.autoworkx.comau and check what they have. 25k should get you a nice set of turbo tuned wheels, but take your time and research your cars before you hand your $$ over.

All the best with your decision.

Regards Evan

MANWHOR3 Proficient

MANWHOR3

Posted
Posted

for 25k, you'll get a shit r34 gtt. No doubt about me. Find a good 34 gtt for 25k and i'll take 1. I don't mean just fully keyboard warrior up a pic on carsales.com. most of them have actually done shitloads of ks, have accident repair history etc.

For 25k, you can get yourself a very good condition sII r33 gtst. If I was to buy another one today, i'd be looking at spending around 21k on the car itself. Then you have about 4k for mods. won't get you 250 rwkw, but it will get your 200rwkw.

But that's just me. I like things perfect with not a single door dent. No swirlies in the paint. No blemishes on the interior. around 60ks. not thrashed. no accident history. Engine bay and underside of the car looking like it just came out of the factory.

Alternatively, buy one for 13k. and replace almost everything in it, since most of it iwll be worn out anyway. But it'll end up costing more than the newer one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...