Jump to content
SAU Community

Recommended Posts

Hi all,

I took Wednesday off from work to take care of the other half.... my skyline. I took my car to an exhaust shop to fit my Batmbl split dump/front pipe and catco high flow cat at 8am. As my time with Matt started at 1pm and I live on the northside, I needed it back by 11am. No probs said the exhaust place, at 11:30 I finally get a call and pick her up. Guess what, they put one of their stickers on my back window!!! God I hate that.

After a nice drive down the Pacific highway I get there slightly late. Matt has a small but very good shop, one of his mates was there helping him out with a monster 32 GTR. It had some problems and needed to be pulled apart and Matt doesn't do major mechanical work.

Matt spent about 2 and 1/2 hours tuning and made some major gains over the previous tune at another shop, obviously it had a lot to do with the new exhaust parts. It missed once on the dyno and on the road test drive. So he pulled out the spark plugs and regapped them and it was all sweet. Matt only charged me for two hours on the dyno, he's a cool guy, easy to get along with but wont bullshit you.

As you can see from the dyno chart the power flattens at 5000, thats because the AFM is maxing out. I have a FMIC, EBC, PowerFC, standard turbo at 13.5 psi with Apex power intake and the exhaust I mentioned before with a 3.5 inch catback. I'm pretty happy with the way its going, just need a new Z32 AFM. After I get one I'll try installing it myself or put out the call to northside SAU members to give me a hand if needed :O .170rwkw at 5000 isnt too bad and after a drive up Mt. Mee(unfortunate name) I'm very impressed with the midrange torque and power.

post-28461-1150630316.jpg

Edited by Nate79
Link to comment
https://www.sau.com.au/forums/topic/122692-my-day-of-tuning-with-matt/
Share on other sites

Well as you know I installed my Z32 first thing in the morning before going on the dyno with Matt....

I did a thread in the DIY section on how to install the afm. But me being a northsider im happy to give you a hand or do it for ya if you need...

Is it true that Matt dose'nt like touching Wolfs?

Yes, he hates touchin Wolf's and will only do it if really needs doing.

Other then that, good to see another write up and good comments about Matt.

I'm gettin my z32 AFM shortly and will be requiring another tune!

Hoping to get this all done before Track day though :D

Autronics are his most favourite, then the fc he said.

when i asked him what ecu i should run (26/30 ~700hp, circuit gtr) he said fc over the autronic as the major advantage is the fc has a knock sensor, also will do everything it needs to

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Had another look at the car and I noticed the fuel pump isn't priming on ignition. I'd taken out the pump from the boot to siphon out the old fuel, so maybe I've knocked something loose or broken a wire putting things back together. Will go back with a multimeter and try to work out what's stuffed. Kinda hoping it's the pump itself thats gone so I can upgrade it
    • Yeah agreed, you can't assume that shop are they only people who ever had to work on it. It was just a guess on the mods based on how things were done back then. You can check the Air Flow Meters by the part number on their tags, they are likely either Z32 or Nismo ones (both read about the same but the Z32 one is a little larger while nismo is stock size but supports the higher airflow like a Z32). And yes, all that would get you to 450hp / 340kw To tell what is happening with the turbos, you want a photo of the tag on the core, that will say what it was made out of  (they can retain the front and rear covers to make the plumbing easier)  
    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is juan@bardabe.com   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
  • Create New...