Jump to content
SAU Community

Recommended Posts

AFter a session with the search button and nothing returned on me i just want to ask what is the best way to remove those hideious badges that reside on my car's arse?

i was told eucalytus oil?and a plastic knife?? thing is on inspection those badges look like they really stuck there and i am worried any attempt in pulluing them off will pull off paint, being such an old car/paint.

tips/advice/procedure??

cheers.

Jam a chisel, or somethin similar, like say maybe a flat blade screwdriver..? In behind the badge, get yourself a decent sledge hammer. Now this is important, its got to be big. If you struggle to pick it up with one hand, your doin well... Make sure your shoulders are quite warmed up, and be prepared for the blow. If all goes well, that badge should come off no worries. Hope this has been helpfull.

ROFL i must agree with HIPSI Gossies is pretty bad, one of the worst places to leave ANY car... haven't parked at Midland train station and i dont intend to either...

Back on topic

Best method ive found is to use Tooth Floss. Its worked 4 times for me in the past, maybe fishing line could work as well :(

Midland Nah!! Go Gossies mate. Those badges will be gone, centre caps, wheels, interior. :D

pffffffttttttttttt my gtr is parked in gossie all day every day and i aint been badged there i was badged in freo :D

Do it slowly, and the reason for the plastic knife is so you dont scratch the metal. You just need to break down the glue so whatever does that. :D

What badges are you talking about here as well?

Use a hairdryer to heat up the badge. Slowly try to peel it off. If the glue is not soft enough, heat the badge more a little. Sooner or later the glue will become so soft that u can peel it off without leaving a stain.

P/s: This will effectively destroy the badge too.

I took the "gtst25" sticker off of my boot and the S badge from the bonnet by heating them up with a hairdryer and using a credit card on the sticker and then some eucalyptus oil to get rid of the residue.

To get the badge off of the bonnet, I heated it up with the hairdryer and used fishing line to dislodge the badge from the goo, heated it up more with the hair dryer and peeled it off with a credit card and again, the eucalyptus oil to remove the residue.

All up it took me about 40 minutes or so (I was being cautious).

Hope this helps.

Regards,

Jason.

I took the "gtst25" sticker off of my boot and the S badge from the bonnet by heating them up with a hairdryer and using a credit card on the sticker and then some eucalyptus oil to get rid of the residue.

To get the badge off of the bonnet, I heated it up with the hairdryer and used fishing line to dislodge the badge from the goo, heated it up more with the hair dryer and peeled it off with a credit card and again, the eucalyptus oil to remove the residue.

All up it took me about 40 minutes or so (I was being cautious).

Hope this helps.

Regards,

Jason.

That sounds the best method yet.. :D

best thing for removing the residue that I have found is a liquid called dissolveit. wipe it on and all traces of the glue residue is gone. Plus it works great on materials, so can remove any sticky leftovers from the seats, door trims etc :wub: hahaha

best thing for removing the residue that I have found is a liquid called dissolveit. wipe it on and all traces of the glue residue is gone. Plus it works great on materials, so can remove any sticky leftovers from the seats, door trims etc :P hahaha

i know we all like our skylines, but 'sticky residue' on the seats?

c'monnn jason! :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • The oil pressure sensor for logging, does it happen to be the one that was slowly breaking out of the oil block? If it is,I would be ignoring your logs. You had a leak at the sensor which would mean it can't read accurately. It's a small hole at the sensor, and you had a small hole just before it, meaning you could have lost significant pressure reading.   As for brakes, if it's just fluid getting old, you won't necessarily end up with air sitting in the line. Bleed a shit tonne of fluid through so you effectively replace it and go again. Oh and, pay close attention to the pressure gauge while on track!
    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
×
×
  • Create New...