Jump to content
SAU Community

Recommended Posts

Hi ppls.

I've just ordered a Braided Clutch line from Greedy, but I have a question.

In the pics below, you can see the standard piping is quite long and convoluted.

Is there some obscure reason for this?

I'm getting the braided because I'm fitting a heeavy clutch and new shifter this week so I figured I'd may as well do the clutch line as well.

I'm sure that it is a good thing.

I'm just curious as to the extreme length of the standard lines.....

post-6399-1150786562.jpg

post-6399-1150786569.jpg

Link to comment
https://www.sau.com.au/forums/topic/122994-braided-clutch-line-verses-standard/
Share on other sites

Hi ppls.

I've just ordered a Braided Clutch line from Greedy, but I have a question.

In the pics below, you can see the standard piping is quite long and convoluted.

Is there some obscure reason for this?

I'm getting the braided because I'm fitting a heeavy clutch and new shifter this week so I figured I'd may as well do the clutch line as well.

I'm sure that it is a good thing.

I'm just curious as to the extreme length of the standard lines.....

The pipework loop is there to cool the clutch fluid. Obviously Nissan believed that under extreme circumstances the clutch fluid can overhead/boil and leave you with no hydraulic pressure.

:P cheers :(

Edited by Sydneykid
So SK.

Have you ever had clutch fluid boil and leave you with no pressure?

Nope, but we always run the standard loopy lines, so maybe they work :(

I have purchase a braided line for my own R32GTST but I haven't fitted it yet.

So maybe I will have a problem then. :P

:( cheers :(

Bass Junky,

How much did you pay for the braided line and where from? I've been thinking about getting 1 from Ebay for $100 delivered when I fit a new master/slave cylinder as it's the only place I could find 1 off the shelf.

I just replaced the short section between the bracket and slave cyl with a maltech item.

there should be no expansion or deterioration in the metal tube section anyway..?

benm - they're like $70 or something like that from maltech and can make it to suit the car

I just replaced the short section between the bracket and slave cyl with a maltech item.

there should be no expansion or deterioration in the metal tube section anyway..?

benm - they're like $70 or something like that from maltech and can make it to suit the car

That really sounds like a better option to me, just to replace the rubber and not the metal.

Music to my ears, thanks for that ronin

I simply had the line entering the little box do a 180degree bend and connect to the rubber hose connector, this bypassed the little box and loopy line.

Made it so much easier to bleed.

Clutch feel, it appears instantly the clutch is much easier to regulate, its as if the pedal has a higher resolution when feeling that oh so fine ceramic puk take up point.

Basically.. Made it nicer to drive, in 40degree peak hour traffic the clutch was fine, but I don't do track work so I can't tell if there's a problem with clutch fluid boiling.

clutch boiling hmmm.....i noticed on the nismo clutch lines theyre wrapped in what looks like a foil heat wrap. wether thats to keep heat out or in im not sure.

ive got the maltech item in my 33 and the clutch feel is much more responsive and slightly heavier than standard which is good which makes for better driving.

I just got an email quite back from Steve at Maltech.

$90 inc postage for the R32 GTR braided clutch line.

$430 inc postage for the R32 GTR front+rear braided brake lines.

$470 inc postage for both together.

Think I might order myself a clutch line, thanks for the info Pete.

I just got an email quite back from Steve at Maltech.

$90 inc postage for the R32 GTR braided clutch line.

$430 inc postage for the R32 GTR front+rear braided brake lines.

$470 inc postage for both together.

Think I might order myself a clutch line, thanks for the info Pete.

Does maltech do a braided line that just replaces the rubber section, i think this is a better option that replacing the whole thing.

Benm, the clutch line you ordered, does it just replace the rubber or the whole lot.

Thanks mate :P

The maltech braided replaces the whole metal pipey thing.

Gives a nice feel.. no problems so far.

Ronin 09 mentions above that he just replaced the rubber hose part of it with a braided maltech item. I would prefer that and am keen to know if they are available etc.

You can buy a Nismo part which has the heat sheilding and stuff on it, it's only a couple of inches long.

Costs about $70+ delivered from Greenline, but Japan is out of stock until end of month.

Maybe you could give dimensions and fitting sizes to Maltech and they could make up a custom one.

I wouldn't think there would be a great difference in price, as most of the money is in the fittings and the labour to put it all together.

When I get mine, I might wrap any part that would be exposed to heat in some ally heat stuff.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...