Jump to content
SAU Community

Recommended Posts

hey

my car is a series 1 r33 gts25t. Lately my turbo has been making a very faint whining noise every every now and then. This happens between -30cmHg and -20cmHg (read out on blitz dual sbc spec s). This is the only time i hear this noise (under very light throttle), never when making positive boost or under hard/harder acceleration.

Is my turbo on the way out? Or is a maybe a slight leak somewhere, or possibly something else?

I've searched some other posts and people say they get a squeal/whine noise when making boost at say 3500rpm, yet i get a faint whine at about 1800rpm, so i'm not too sure...

Link to comment
https://www.sau.com.au/forums/topic/123089-is-my-stock-turbo-dying/
Share on other sites

no, it doesn't blow any smoke (looked for that, and have also looked for any oil coming out of the turbo or piping and there is none).

the car has done about 104000km (assuming if it has been wound back, then more than this figure). It is a 93 model.

boost is stock and a setting at 10-11psi. But before the ebc (about 1 and 1/2 yrs ago) who knows what it could have spiked to during the period after the exhaust was fitted, as all i had to go by was the stock boost gauge.

mine does the same on slight acceleration - changed oil regularly and all seems fine tho - still makes slight whine (like a dog whistle almost) which I've heard on lots of others - bear in mind this turbo is spooling up to the phenomenal speeds it spins at just before the actuator opens so on slight accel your gonna hear something spin up - I haven't heard a totally silent one yet myself but I'm no expert either so every skyline I've driven or drove in might have been knackered lol!

the slight noise you could be hearing could be air passing through the bov. there is a point where you can hold the throttle where the bov will be open slightly. and since there is air permanently leaking around the bov through a recirculation hole, it can cause a whistle.

hey mad082 - you mention a bov (I'm assuming thats a blow off valve heh!) - do all r33gtst's have them or are they aftermarket addition?

I only ask as mine too makes this subtle whistle and it is at a certain point on the throttle as you said but I dont have an aftermarket dump valve on my car :D

theres other signs that your turbo is going anyhow - small puddles of oil in that metal piping that feeds up from your intercooler. There can be slight smears in the pipe that you can wipe of with your finger (charge pipe is it?) so dont fret if you pull it off and see that but if you pull if off and see it dripping then I'd be a bit more worried :D

smoke out the back on hard boost - basically oil escaping I think.

only know this as I had to disconnect mine getting to the spark plugs and we checked this area recently

all 33's came stock with a blow off valve... although the correct name is compressor bypass valve. it is situated just before the throttle body, on the cabin side of the piping. the are hooked back up to the intake between the air filter and the turbo, so that when you lift off the throttle the air goes back through the turbo to keep it spinning (like blowing on a kids windmill that you get from fair).

also i had oil dripping out of my intercooler piping at the throttle body, and a small amount through the piping before i did my frount mount. I thought it might've been the turbo on the way out, but after a few weeks with the front mount i pulled one of the new pipes off and there was no trace of oil at all. it turns out that the stock front seal on the turbo will always leak a tiny amount of oil. the front seal is like a piston ring. it isn't a full circle. it has a slight gap in it.

so my problem was just old oil, and a bit of blow by.

Edited by mad082

thanks guys. I will get the car on a hoist and a have a good look to check for tiny leaks in intercooler piping, as well as make sure the bolts on the tubo aren't loose.

Didn't think of the that tiny air recircualtion hole in stock bov, could be that.

Cheers...

Don't discount the bearings.

Mine had that whine on boost, it was on and off, and didn't really effect the performance.

I did a track day at Winton, all was good, but on the video, I coul hear it whining. high pitched noise.

A week later the bearings shat themselves.

So I got a high flow.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I certainly fall into the annoyed camp, but glad to hear that if it's happening at low boost then I'm not likely going to blow a turbo and end up with metal shards in my oil. Just feels like it prevents me from really driving it without hesitation and "peak" performance. Wonder if it's the VCAM, it did an impressive job of shifting the torque curve and faster spool, but maybe now it's "too fast" and there's too much air for how open the throttle is.  Based on some other threads, will also do some reading on synchronizing the actuators. They are the default actuators that come on the Garrett's and I would think they would be set the same coming from the factory, but if the turbos don't actually work exactly the same way at the same time as previously mentioned, it would be worth making sure the actuators are actuating together properly
    • I went down this rabbit hole before, ended up sourcing a motor from the UK (I'm in Japan) which also didn't function correctly. With the original motor, I disassembled it and reassembled it and it works somewhat, sometimes. What I could deduce from all my screwing around is that there is calibration of the gears on the inside of the motor and two ramps on the main gear which activate switches that operate the motor and move the sunroof either to retract into the roof or tilt. Where I got stuck was that, it seemed in my case that one or both of the switches that are activated by the ramp on the gear did not always activate and thus the motor did not move, causing it to sometimes not retract or tilt (apologies, I've forgotten which way it didn't work.).  Of course this part is discontinued at Nissan now, it's the same part in the S15 but no other models. I also contacted the manufacturer of the component for schematics - forgot the name, they're based in Gifu - but they declined to share the information due to being bound by an NDA, sadly. Looking through my pictures now, it seems I last had a crack at this in 2022. See, I so kindly wrote "open" and "close" next to the switches. If you figure it out, please do tell me. Those little switches, with the red buttons may need to be replaced.
    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
    • Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
×
×
  • Create New...