Jump to content
SAU Community

Recommended Posts

  • Replies 158
  • Created
  • Last Reply

Top Posters In This Topic

Hey mate,

Have a look at these two, might be the products you are looking for.

Product 1

Product 2

The first one would be nice, the second one better as it is higher powered and will give you more output.

Either way the both come with, sub, amp, box and cables.

  • 3 weeks later...

Has anybody had any problems with depth when putting splits into the front doors..

i was told that alpine wont fit.. due to the fact that i want my window to come all the way down without hittin back of speakers..

And i dont want to have to put in massive spacers that make my inner pannel part to stick out..

What brands would fit?? (depth wise)

Edited by Fugi
  • 2 weeks later...

Hey guys

Just wondering what the pick is out of JBL and mtx or are they much the same.

I didn't want to splash out and go the real high end gear but want to spend a bit more than say your pioneer or kenwoods.

I'm talking speakers subs and amps..

Lastly, what do you guys think of installs at places like wow, strathfield of JB?

your in brissy I see. leave those alone. JB is contracted and its a mixed bag (most have 17y/o with little idea.) wow depends on the shop. SCR - forget it.

fire me a PM if you want a decent job done. (click sig)

  • 4 weeks later...

Hey all. Im after a nice and simple decent system. Im only going to go for speakers and no sub woofer. Im basically after decent all round quality. Im thinking of the Pioneer Pro series 6" splits component speakers for the front and then a half decent 6" rear speaker and sound deaden the front doors and get a decent amplifier. Would this be alright???

Hey guys

Just wondering what the pick is out of JBL and mtx or are they much the same.

I didn't want to splash out and go the real high end gear but want to spend a bit more than say your pioneer or kenwoods.

I'm talking speakers subs and amps..

Lastly, what do you guys think of installs at places like wow, strathfield of JB?

ive dealt wid JB near TTP in adel, couldnt be happier wid them very helpful. great prices and great gear to! i bought all Kicker stuff

Hi there, first time post as I just joined (buying jakegts's R33 on the weekend) and I'm looking for a headdeck to suit.

After a single DIN, but the problem I'm having selecting one is choosing one that can run two amps (one for splits front and rear, and one for sub) but also has RCA inputs, that can be selected as a source.

The main reason is that I'm looking at something like this for the second DIN slot, as my iPod is absolutely chockers of music. I currently have an FM transmitter for my work car, but quite frankly, this just doesn't cut it.

Anyone know of any headdecks that can do this that are quite nice? I'm more an Xplod person myself, however I'm willing to switch camps (no double entendre intended) if the right headunit is found.

Thanks for all help in advance!

Edited by cpd
  • 2 weeks later...

Im researching some splits for car and also headunit. I would like to stick to clarion as i can get discounts through them.

SRS1752HX

http://clarion.com/au/en/products/2006/aud...9306870302.html

SRS1686

http://clarion.com/au/en/products/2006/aud...9306870100.html

Should i spend the extra for the HX model or will the 1686 be plenty?

Also,

Is there a clarion headunit with 4channel output + subwoofer output? Cant seem to find one with sub out..

Cheers

Discounts thru Clarion, hmm that sounds nice. I didnt know they dealt with the public direct.

I dont think they do, i'll be getting them through a friend.

How about this clarion headunit? Its the only one i can find with 3 pre-outs in their range

DX766MP

http://clarion.com/au/en/products/2006/aud...9306869871.html

Or would a pioneer/alpine unit be better for the same amount of money?

Cheers

I am keen for some decent advice on the speakers. I have all of the other components for the system and now I need to match some decent speakers so I can get it all installed in one go.

Here is what I have so far:

- Kicker KX200.2 Amp (for the sub)

- Kenwood 200W RMS 12" sub

- JVC KW-AVX700 head unit (http://www.jvc-australia.com/JVC/client/c_...&prodID=173)

As far as speakers go the guys on the forum have convinced me to go with 6.5" for the front and back.

I don't really want to spend more than $200 on a set of front splits and the backs don't need to be anything too flash right? The speakers will be running off the head unit so I need to find speakers that are going to match the HU right?

My original plan was to go with a set of Alpine SPE-17CS ($138) 35W RMS splits for the front and a cheaper set of Alpines for the back. I am not too sure of the output quality of the HU (20W RMS?? is what I was told) and have been told that the above Alpines will certainly match it well. This is my main concern as I don't want to waste money on better speakers unless the HU is gunna have the power to drive them.

Anyway guys, give me your advice on the above. Would you go with the Alpines? What others would you suggest? Don't want to spend more than $300 all up for front and backs.

Brands and model numbers would also be a big help as there are so many different types out there.

Thanks guys...

Edited by aah00n
  • 4 weeks later...

Hello,

Currently in the process of choosing an amplifies and due to time constraints have to make a choice now or i lose a chance of a good deal.

The subwoofer amps im deciding between are:

- US AUDIO USA554-220Z - 4 x 50w & 1 x 220w RMS + sub w/ box

- Clarion APX1300 - 1 x 300w RMS @ 4ohm

- Jaycar Response AA-0424 - 500w RMS x 1 @ 4ohm

the US Audio amp+sub package is 2nd hand and selling for the same price as brand new clarion/jaycar amp.

Im leaning towards the US Audio amp w/ sub due to its low price but im not sure if i will be wasting money.

Any help will be great :D

Thanks

- Patrick

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...