Jump to content
SAU Community

Recommended Posts

A few R32 owners cut out the number plate bit to allow more flow to the FMIC. i want to cut it our as big as the FMIC. i know it has been done before but i cant find any pics of it. if anyone has any it would be much appretiated.

(dont know if bars are spec related but mines a TYPE-M, goes straight down instead of back behind)

cheers

Daniel

Link to comment
https://www.sau.com.au/forums/topic/124812-pics-of-stock-r32-front-bar-mods/
Share on other sites

Hahah you know that pic of my car has a copyright on it :D ,lol just kiding, i was actually going to do the same thing as your thinking about, get the bumper cut the whole size of the cooler, i think it looks good (but only if its done right) i have some pics on my other computer i will try and post them up tomorow

The guy spraying my car may be able to do a kit for doing this to your std bar, using an insert. Just paint it and cut the bar and it shoild look ok. I should be able to put up pics of my car in the next 2-3 weeks when its sprayed...if i pull my finger out and get the parts to finish the car

yeh didnt think that it might need to be reinforced. front bar seems to be fair sturdy but will hafta look into it.

And cheers for lettin me use your pic. very nice car youve got there.

yeh didnt think that it might need to be reinforced. front bar seems to be fair sturdy but will hafta look into it.

And cheers for lettin me use your pic. very nice car youve got there.

Cheers :ermm:, Heres the pics i said i would post up

choppedbumper2.jpg

1031445.jpg

IMG_0608.jpg

cf_12_1010088.jpg

This one looks like its been done a bit ruggered

magbate200601151243ridefile3.jpg

You don't necessarily need to block the holes, why not box off the intercooler to the radaitor?

If you have basic fiberglass skills this is too easy i have done it twice. If not you could either learn as i did or take it to a smash repair place or body kit specialist.

Since i love whoring pics of my car more than roy check my front bar out.

http://image-cache.skylinesaustralia.com/f...s/DSC003551.JPG

:(

I recently bought my self a little fibreglass kit. :D

Time to learn.

Hehe good work, its quite easy to work with once u have a little practice. It really helps if you have a book to go by or someone to show you though.

Just watch when ur sanding it, getting that stuff in the pores on ur skin aint fun, well as far as i can remember :(

Yeh, im using an insert that goes over the bar.It looks great, and the the guys that did it for me did a good job as i was haveing hissy fits as i was too impatient to get a good finish. When the car is sprayed the extra something in store for the bar is going to look great :P

Dont the holes to the side look gay? Air is lazy and will go the path of least resistance..so the open sides will allow air to pass around the intercooler, not through.

I had seen plenty of cut bars but they where all nasty! So when I decided to do mine, i wanted it formed to feed/trap the air to go through the intercooler and when searching for anyone else that had done it I came accross GTS26's photos which is exactly how mine now looks but with an almost factory looking plastic meshing of all holes (M-spec bar) and a Genuine GTR intercooler for the stealth application. A design which has proven its worth when pulled over I've been waved through and even exclaimed once that I had a "nice, tidy ride" much to my amazement!

I also took the design a little further and made the hole in the front bar smaller than the intercooler core and getting the form work angled back out to the size of the core and beyond the core which is a proven method of getting air trapped to flow through the core for maximum cooling efficiency and by having a smaller mouth create a ventury(spelling?) effect speeding up he air to pass through as well.

I only paid $250 painted. How can you go wrong?

Edited by ellie

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...