Jump to content
SAU Community

A/C Compressor on R33

SKY000

By SKY000,
in General Maintenance

 Share

Recommended Posts

SKY000 Contributor

SKY000

Posted
Posted

hey guys,

i had the a/c compressor in my GTS die a long time ago now, and i'm trying to source a replacement. I got a quote from JustJap for $495 and i'm wondering if i should really be paying that much - i know they're expensive, but is that my only option?

someone else mentioned they should be roughly $200 from a wreckers - is there anywhere around melbourne that i may be able to get one?

thanks,

simon

Link to comment
https://www.sau.com.au/forums/topic/12492-ac-compressor-on-r33/
Share on other sites
blind_elk Grand Master

blind_elk

Posted
Posted

Rick over at Traction Tyres was bringing in a 1/2 cut RB25DET from NZ for his race car. Might want to ask him nicely if he's willing to sell the A/C compressor to you (obviously doesn't need it for the race car).

  • 4 weeks later...
RON-15H Proficient

RON-15H

Posted
Posted

hey mate i have a a/c compressor its in working condition mine stuffed up also and i came across it, and the machanic that was putting it in said that he doesnt like to use other ppl parts as then he wont cover it for warranty therfor i have spare air con compressor never used and still have the receipt but im sydney and my asking price is $150 if your willing to pay for postage and your current pipes will fit straight on it. let me know or pm me?

Guest bucket1

Guest bucket1

Posted
Posted

My compressor stuffed up about 2 weeks ago and so far I've got quotes of around $300 - $400 for a used one from a couple of NSW wreckers (none down here). The guys from justjap claim they've been selling a few recently, obvioulsy they starting to get to the end of they're usable life. If anyone knows of where I can source a reco or new one, I'd rather fit that than get a used one that may have the same problem my last one had. It has been suggested that I replace the mechanical compressor with a 12 volt eletric one, anyone had experience with this sort of modification? The place I got to look at it reckons that they can't get an aftermarket replacement and doesn't know if Nissan Australia could get one for me without the part number.

Targa Tom Proficient

Targa Tom

Posted
Posted

Guys,

A Deisel Kiki, or Nippon compressor has RRP of $1000+. Nippon Air in Melb can rebuild them for an authorised fitter and that will mean wnty.

I have seen my fair share of A/C comps... fitted hundreds actually and my tip is... the wreckers are always a punt. You outlay $400 and then six months later booooom... another $400!!!

That adds up to a re-manufactured one with oil to compliment latest type gasses

Ciao

  • 3 weeks later...
Guest bucket1

Guest bucket1

Posted
Posted

Thanks Targa Tom, the one I had removed was by ZEXEL and I have been told that it is harder to get than the Nippon, besides that the fitter who removed the stuffed one has turfed it so I can't get it rebuilt. I am currently making enquiries with Mobile Air Con in Sydney who may be able to get a replacement, fingers are crossed.

2rismo Grand Master

2rismo

Posted
Posted

Read! JMS and Justjap have them almost all the time... they are NOT hard to find and they are NOT expensive...

Using newer types of gas?!?!?! 134A is the current type isn't it? Was last i looked... thats what they use anyway!

plus, make sure you get new seals and shit when it is re-done.

easy

Nizmo Grand Master

Nizmo

Posted
Posted

mines buggered - the nissan a/c compressors arent exactly the best quality. Ive taken mine out and basically did the ring around but noone in perth had a gen one - so i got a brand new one for $300 and just need to make up the bracket so it fits to an R33 :P

Nizmo Grand Master

Nizmo

Posted
Posted

Uniola UP120 - i think.

My dads making the brackets up - or will be - if he has any problems i'll let u know. Im not really impressed about him going anywhere near my car it always spells trouble so ive been putting it off as long as possible - but the air con guy is starting to get impatient cos he pulled the old one out and needs to refit the new one ot get paid. I'll keep u informed :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      CD009 RB Conversion

      By TurboTapin · Posted

      Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Nightmare_mistress_R33
      CD009 RB Conversion

      By Nightmare_mistress_R33 · Posted

      Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

      75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

      Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
×
×
  • Create New...