Jump to content
SAU Community

Recommended Posts

i either have standard 32. or standard 34 dumps on my car.

32 dumps should be cast

34 dumps are stainless from memory and are quiet reasonable design

pete

ps if the cast r32 i would upgrade running your 34n1 turbos but if they are 34 ss dumps you'll be fine

Guest Mashrock

ok

so new boost controler and new dump pipes is definatley in order.

i see them as the only things restricting my flow and causing dramas.

mainly the dumps tho

trust split dump and front pipe will be on order next week

and hks evc 5 also is on its way now.

then more dyno and see how it goes then.

and then maybe a tune if my afr is still up the swanny

ok

so new boost controler and new dump pipes is definatley in order.

i see them as the only things restricting my flow and causing dramas.

mainly the dumps tho

trust split dump and front pipe will be on order next week

and hks evc 5 also is on its way now.

then more dyno and see how it goes then.

and then maybe a tune if my afr is still up the swanny

ha mash,

what is your intake system like as everyone concentrates on exhaust and forgets the same airflow that passes out the exhaust has to make it in and it isn't forced in it has to be drawn in under vacuvm through air filters and piping which is not all that good.

I have found running the 80mm afms (rb20/25 or z32) descreen and solid 3" hard piping very worth whiled and apexi pod filter(maybe the best pod on the macket for flow and cleanlyness) bolt straight up to the 80afms.

pete

ps just another thing to consider

ok

so new boost controler and new dump pipes is definatley in order.

i see them as the only things restricting my flow and causing dramas.

mainly the dumps tho

trust split dump and front pipe will be on order next week

and hks evc 5 also is on its way now.

then more dyno and see how it goes then.

and then maybe a tune if my afr is still up the swanny

Hey Mashrock,

Just wanted to know where you ordered the trust dumps ?

I am looking for a supplier for my gtr.

Thanks

Guest Mashrock
ha mash,

what is your intake system like as everyone concentrates on exhaust and forgets the same airflow that passes out the exhaust has to make it in and it isn't forced in it has to be drawn in under vacuvm through air filters and piping which is not all that good.

I have found running the 80mm afms (rb20/25 or z32) descreen and solid 3" hard piping very worth whiled and apexi pod filter(maybe the best pod on the macket for flow and cleanlyness) bolt straight up to the 80afms.

pete

ps just another thing to consider

the intake is pretty good. except for the exposed pods. which will very soon have a nice alloy box made up for him i have the cardboard template sitting here ready to be made.

i'd say there isnt a great deal of restriction on the intake at all and a nice arc cooler to go with it all. hks pipe some where in there also.

and i havnt ordered them yet. still working out whats best for me.

post-15086-1152189522.jpg

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
    • Fair enough, I am in no way a tire expert so I'm not familiar with all the terms and conditions. I'll definitely note down the AD09 to potentially try in the future. Rain is not too big of a concern for now as I will probably only drive in the rain when I have to. And considering I still lack experience driving the GTR I'd more than likely take it easy too. I have coilovers in the car but as I barely got to drive so far I never bothered to even check if they are adjustable haha. The suspension is almost entirely old and worn as well so I suppose when I eventually fix that in the future that would make a huge difference.
    • There's not a great deal to report here .... except ...... FOR .... LSD!!!  I bought a Quaife LSD from the UK and shipped it here .... Wish I'd just bought locally cause the shipping and duty was $700! But there were so many diffs used in the E90s I just wanted to be absolutely certain I was getting the right one so I spoke with a supplier in the UK who builds race cars and they have heaps of experience with the E90s.  I pulled the diff out which was seriously awesome - I've never done anything like that before, I must have watched 1000 videos on YT about it as well as consulting the Bentley manual. It was super easy in the end. The diff was delivered to the awesome folks at Hornsby Diffs and will be back in a few weeks. I also replaced the diff bushings with some Nolathane ones.  Really looking forward to getting it back and getting back to the track or even the skidpan.
    • yeah... the 13kg/mm springs weren't always in there, I had 10kg/mm but doing a few SMSP commanded heavier front springs. It's so good now going into T1 and T2, just need more seat time and real tyres.
×
×
  • Create New...