Jump to content
SAU Community

Recommended Posts

So my car has been sitting in a workshop for 9 weeks next monday...and has not been started.

Its a S2 R33 GTS-T.

Hoping to pick it up next week, so i was just wondering what issues, if any should i look out for and look to prevent if possible?

I'm expecting the fuel to be shit (3/4 tank :P) so i'll just drive around nice and easy till thats all gone....was also thinking of putting in a bottle of injector cleaner when i pick it up...

New clutch will be in, so i'll be taking it easy for the first few hundred k's anyway...

Any other issues that may arise?

do these engines shit themselves after having not been started? knowing my luck, ill start it, and it'll go bang!

Thanks

Dezz

Link to comment
https://www.sau.com.au/forums/topic/125273-car-not-started-for-9-weeks/
Share on other sites

i'd soo laugh if it went bang :P

...jokes dezzy my boy lol, i know what its like for ur engine (engines in my case) to let go on u...y not be on the safe side and drain the petrol and replace it straight away?

i'd also make sure u prime the car for a fair bit before u go to crank her over, that's about all i got to add other than cross ur fingers hehe

Is it advisable to use injector cleaner anyway?

I was considering this lately.

I've always avoided these additives in the past as a rule of thumb. they're usually not very good or useful.

But i've heard ppl on this forum using them, better fuel economy, smoother idel, etc.

opinions ???

also, sorry for hijacking, i have a habit of doing that. but it's ok, coz i dont care :P

thanks for the replies (except the hijack, please start your own thread or search)

I used injector cleaner when the car was first imported, but havent used it since...dont really see the need if you're using good fuel all the time which we do.

the last thing i need is for the engine to go after all this

lol, you told me off for hijacking, then answered my question anyways. excellent.

i dont see why you'd have probs just coz the car has been sitting.

except for maybe a low battery and 'stale' fuel. but nothing serious.

dezz, im pretty sure if the engine did munch itself, ud cry, caus i know i would, if it was just because the fuel was stale.

so do the right thing and change that fuel, hell im sure u can find a use for it somewhere else

It'll be fine mate. Our cars sit on the dock for even longer before we get them.

I can't remmeber how long it was, but I think the buying, shipping, sitting, compliance etc of my car was about 6 months.

Just drive easy. You don't need injector cleaner or octane booster or anything.

It'll be fine mate. Our cars sit on the dock for even longer before we get them.

I can't remmeber how long it was, but I think the buying, shipping, sitting, compliance etc of my car was about 6 months.

Just drive easy. You don't need injector cleaner or octane booster or anything.

i imported my car, and it was no where near 6 months for me...thats why i bothered with this thread

My car was moved from the auction house to the docks, where it sat for 3 weeks...it was started when the guy in japan went to take some photos for me (i have a photo of it at idle) and then again when driven onto the boat.

2 weeks later it was driven off, and then could only have been left turned off for a max of 2-3 weeks

thanks for the reply though. hopefully its all good

My car took 6 months. Also, many cars just sit at the auction holding yard waiting to be sold and stuff for ages. A soarer that we imported sat for 9 months before it was bought.

Basically, it'll be fine. I wouldn't worry about the fuel or anything. E.g. my car, on the dock, it needed a jump start, drove it straight off the dock to hobbs brothers, where I then drove it to compliance. simple.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So..... it's going to be a heater hose or other coolant hose at the rear of the head/plenum. Or it's going to be one of the welch plugs on the back of the motor, which is a motor out thing to fix.
    • The oil pressure sensor for logging, does it happen to be the one that was slowly breaking out of the oil block? If it is,I would be ignoring your logs. You had a leak at the sensor which would mean it can't read accurately. It's a small hole at the sensor, and you had a small hole just before it, meaning you could have lost significant pressure reading.   As for brakes, if it's just fluid getting old, you won't necessarily end up with air sitting in the line. Bleed a shit tonne of fluid through so you effectively replace it and go again. Oh and, pay close attention to the pressure gauge while on track!
    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
×
×
  • Create New...