Jump to content
SAU Community

Recommended Posts

Hi guys, I don't own a skyline (we can't all be perfect... >_<) so I don't know that much about them. I'm looking at getting a set of wheels for my car which apparently have a GT-R offset (+15mm?). Mt car has a 5x114.7 stud pattern but some ghey offset like 0.

I would like to know, if possible, the diameter, width and offset of stock GT-R wheels, 32, 33 and 34 would be great, if they are different.

If someone is feeling generous and has a set and could spare a small amount of time for me to trial fit one of the GT-R wheels on my car that would be awesome...

Thanks for your help :sick:

Link to comment
https://www.sau.com.au/forums/topic/125329-gt-r-wheel-dimensions/
Share on other sites

hmmm.... +30...this does not bode well for me....how does that compare to a non-GTR skyline or Supra offset? I tried a couple of 17X9 supra wheels on the back the other day, and needed probably 15-20mm more clearance between the back of the wheel and the inner arch to fit, though im not sure how much clearance there would be at large amounts of suspension travel...

Has anyone ever flaired thier guards on a R33 GTST in order to fit a set of wheels with +30 offset?

If so, could you send me some photos of what the guards look like after they've been flaired.

I've got a set of Volk racing GTC's that have the +30 GTR offset for the rears that are going on my R33 GTST but we need to flair the guards becuase the wheels end up, inline with the wheel arch when fitted to the car..... ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...