Jump to content
SAU Community

Recommended Posts

Im interested to find out who you have used to get your Stagea?

I have recently handed over a deposit for an importer to find me the Stagea I want.

After an unsuccessful bid recently, and looking at the J-spec website, im wondering whether Im using the right people.

For example, the car we bid for sold for 690,000Yen (higher than the budget set) My importer then went on to explain a car at that price would cost me $22,000 landed and complied! which I think is a little rich considering they only take a $1500 fee.

I have noticed that J-Spec offer similar priced cars (in Yen) landed for around $16-17k.

Considering J-Spec offer a $1000 fee, Im wondering where all those additional dollars are going...

Who on here has used J-Spec or any other importer that you would recomend?

Thanks for your help.

Ben.

Edited by bbenny
Link to comment
https://www.sau.com.au/forums/topic/125565-who-you-used-to-get-your-stagea/
Share on other sites

i am also using jspec here and so far so good mind you my baby is still sitting on the dock in japan but due to go on its cruise to sunny australia on the 28th this month :thumbsup: .i did start proceedings with a company in perth to find me a stagea but wasnt happy with what they were offering and was told a white one was hard to find but i switched to jspec and put a hold on mine straight away.i did get my deposit back from perth with no problems

i sued j spec and they are very knowledgeable. They dont srew you around. Go Jspec man. My car only took 1 mith to arrive though

1 Minth! (I think you mean month) Didn't you buy the car in April and it arrived last week?

Your thread

I make that 2 and a half MONTHS... Let's not get unrealistic here now, mine took a little over 3 months to arrive and it did end up costing more than the calculators show but not $6K more!

Luke

1 Minth! (I think you mean month) Didn't you buy the car in April and it arrived last week?

Your thread

I make that 2 and a half MONTHS... Let's not get unrealistic here now, mine took a little over 3 months to arrive and it did end up costing more than the calculators show but not $6K more!

Luke

[/q :dry: uote]

Soz my bad type the winr month i mean 2 mths. :D

;)

What sort of extra costs have you been hit with that were not listed?

I spoke to the guys I have been dealing with today, and it just seems too expensive! the whole point of buying a car in japan was to save money, the figures they are now gicing me after having payed my deposit are now much higher, so much so i would be better off just buying locally and being able to see and drive the car before laying out the cash...

What sort of extra costs have you been hit with that were not listed?

I spoke to the guys I have been dealing with today, and it just seems too expensive! the whole point of buying a car in japan was to save money, the figures they are now gicing me after having payed my deposit are now much higher, so much so i would be better off just buying locally and being able to see and drive the car before laying out the cash...

Actually the whole point of buying in Japan so you have access to vehicles you can't get here :P

Actually the whole point of buying in Japan so you have access to vehicles you can't get here :D

Yeah don't think you will save thousands by importing, it doesn't always work out that way...

My Extras were:

- Timing belt, other belts, timing belt idler pully $260

- Front indicators (as the car had none) $65 each

- Sourcing and shipping standard sized wheels around the country (still cheaper than buying the 18's that are on my car by a long shot!) ~$500

It is just the small things that are not picked up before the car gets to you, probably not always but you need to factor that in. If the figures these guys are giving you don't add up then I would move on, buying localy is great if you can do it and I would have if there was something in the same state at the right price for sale and I probably will next time so if that works for you then do it.

To get something that is cheap you need to be happy with higher kms really, if you are then importing could be pretty rewarding.

Anyway you are doing the right thing, and that is research!

Cheers

Luke

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...