Jump to content
SAU Community

Recommended Posts

I was in a three car crash about three months ago

A cooner pulled across the road the two cars in front of me stopped but i hit the corrolla and pushed that into a pug.

Was hardly any damage to mine ofr the pug the corolla had moderate both ends.

I believed i am responsible for the whole cost, buit i have also been told that ony the rear of the car that i hit is my problem as they should have left enough room.

Any ideas,

Cheers

Wagon

Link to comment
https://www.sau.com.au/forums/topic/125812-crash-_/
Share on other sites

The way I understand it is that you are only responsible for the damage you caused to the car directly in front of you.

If they ran into someone else, then they pay for that damage.

Might be best to call your insurance company and ask them - will be cleared up in no time.

Link to comment
https://www.sau.com.au/forums/topic/125812-crash-_/#findComment-2325099
Share on other sites

It is my understanding that you are responsible for the whole accident if everyone else managed to stop without hitting something.

The fact that they didn't hit anything when they emergency braked means they did have enough room between cars to stop in time and the fact that you then hit them means YOU didn't.

Anyway it would be best to speak to the insurance company involved.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/125812-crash-_/#findComment-2325126
Share on other sites

when you say pulled across the road to you mean on a main road and the corolla went into the middle of the road?

Because there is only ment to be one car there at a time, if theres 2 its called "turning two-abreast" and it's illegal for the second car to be there.

Link to comment
https://www.sau.com.au/forums/topic/125812-crash-_/#findComment-2325223
Share on other sites

i had this happen to me a few yrs ago. a bloke cut me off and run into the car that was in front of me i then run into the back of the bloke that cut me off if ya follow where im comming from . end result my insurence had to pay for the whole lot even tho there was a wittness who backed my story of been cut off .all the police said sorry mate it happens .your the last one on the line the bills yours

Link to comment
https://www.sau.com.au/forums/topic/125812-crash-_/#findComment-2325324
Share on other sites

THis happened to me a few years ago too, but i was the car in front. You are responsible for the damage to both cars as long as the car in the middle had stopped before you hit them.

That is, if you pushed them into the front car, its all your fault. But if they ran into the front car first then you ran into the middle car, you are only responsible for the middle car's damage.

Well thats how the RACV saw the matter.

Link to comment
https://www.sau.com.au/forums/topic/125812-crash-_/#findComment-2326368
Share on other sites

From my understanding very little will get you out of a rear end shunt where your car hits the one in front. Faulty brake lights, no signal etc are all deemed as you driving too close in all cases I have seen.

Where one car shunts another and in turn another, again my understanding and experience (not personally) is each car that hit the one in front pays. So if I have read this correctly, you wouldnt pay for the damage to the pug but to the corolla.

HTH

Link to comment
https://www.sau.com.au/forums/topic/125812-crash-_/#findComment-2328528
Share on other sites

From my understanding very little will get you out of a rear end shunt where your car hits the one in front. Faulty brake lights, no signal etc are all deemed as you driving too close in all cases I have seen.

Where one car shunts another and in turn another, again my understanding and experience (not personally) is each car that hit the one in front pays. So if I have read this correctly, you wouldnt pay for the damage to the pug but to the corolla.

HTH

I was in a similar accident a couple of years ago. I pulled up fine, moderate braking nothing out of control like slamming on the brakes. The car behind me pulled up fine. The third car however didnt. They hit the car behind me, and pushed it into mycar. The third person was responsible for all the damage and it went through their insurance.

The simple way to look at it is, if that third car wasnt there the wouldnt have been an accident. The second car shouldnt have to pay when they hit me, because if the car behind them didnt crash into them , there was no damage caused.

If the second car had hit me, then the third car had hit the second a totally diffent outcome would occur, and it a gets a little harder to sort out.

Link to comment
https://www.sau.com.au/forums/topic/125812-crash-_/#findComment-2329087
Share on other sites

Same thing happened to me yrs ago but i was the second car. My mum has a friend in insurance and from what i was told, whoever is at the rear of the 'pile up' is responsible, regardless of some wanker who can't drive cutting u off or doing illegal bs u-turns(cause of my accident). Even with eyewitness and rego num, legally you cannot prove it was the reckless driver who caused unless you got it on video (seriously how stupid is that?!). So i think you might end up brunting the cost of all the repairs on the other cars and urs. It's f*ked up but I've learned to stay as far away from ppl as possible. Never trust anyone on the road!

Link to comment
https://www.sau.com.au/forums/topic/125812-crash-_/#findComment-2336045
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
×
×
  • Create New...