Jump to content
SAU Community

Wakefield Track Day

dezzabye123

By dezzabye123,
in New South Wales

 Share

Recommended Posts

PORTS Proficient

PORTS

Posted
Posted

Hey Moana, been doing this over the last 8 weeks. 270rwkw just wasn't enough! :P

I had the block bored +40 tho, ACL ross racing forged pistons,

Eagle forged rods, ARP rod & big end bolts, crank balanced & nitrated,

all new bearings and welsh plugs, lower plenum port matched & polished,

block chemically cleaned & pressure tested, exhaust manis port matched

& polished, heads port matched & polished, 5 angle valve grind, coolant

galleries de-burred,a complete gasket kit, new stock lifters, cams left std.

Added to this high flow turbos, sard 650cc injectors, GFB under drive pulley,

extrude honed plenum, sard fuel regulator, 60mm blitz radiator,

55mm throttle bodies, 3" dump pipes, 2.75" mandrel bent exhaust,

high flow cats, s/s UAS resonator, 900x300 FMIC, twin pod filters,

Microtech X12s ecu, Blitz EBC, light weight flywheel, richmond leader diff,

1200kg single plate 9 puck clutch, 19 row oil cooler, urathane engine mounts,

header tank, oil catch can, battery relocated to rear hatch and EGR removed.

Also all new adjustable suspension, camber things, caster bits, whiteline swaybars,

completely removed Hicas lines and stuff.

Should be ready in a week or so I guess, been thrashing the NA,

but i'm suffering from LACK OF BOOOOOOST!!

So how's your project coming along? :dry:

N1GTR Grand Master

N1GTR

Posted
Posted
hahahaa.. omg! so much!!!!! :P i better be afraid! :dry:

shes coming along slowwwlllyyy!!! we're almost too the final stages.. all plans are being wrapped up! just waiting for some stuff from japan! eeek! :O

That means the worst part is almost here.....the bill :whistling:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Duncan
      What brakes on R34 GTT(Europe)

      By Duncan · Posted

      Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • 04-LOOX
      R34 GTR Vspec Garage Sale - All must go!

      By 04-LOOX · Posted

      Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...