Jump to content
SAU Community

Moderator Question ?

MountainRunner

By MountainRunner,
in Queensland

 Share

Recommended Posts

MountainRunner Mentor

MountainRunner

Posted
Posted

Hi,

I have finally got the operating manual for the GTR 4WD Controller I am building almost finished. A few guys have been interested in the controller as it has been seen at my track days being tested. The White R32 GTR, number plate 'cut' was testing it (came 2nd on May 2) as well as the die hard blue GTR.

Can I post the manual here and a brief description so you guys can see what I'm building, or is that against the forum rules. I'd prefer to keep it to the Qld section at this stage as I know you guys. I don't want to cause any problems so I thought I would ask first ?

Thanks

Paul

Link to comment
https://www.sau.com.au/forums/topic/126488-moderator-question/
Share on other sites
Mud Grand Master

Mud

Posted
Posted
Hi,

I have finally got the operating manual for the GTR 4WD Controller I am building almost finished. A few guys have been interested in the controller as it has been seen at my track days being tested. The White R32 GTR, number plate 'cut' was testing it (came 2nd on May 2) as well as the die hard blue GTR.

Can I post the manual here and a brief description so you guys can see what I'm building, or is that against the forum rules. I'd prefer to keep it to the Qld section at this stage as I know you guys. I don't want to cause any problems so I thought I would ask first ?

Thanks

Paul

Paul

Let me get this clear,

Its your 4wd controller that you built?

and you have written the manul for it?

then you hold the copyright to it and you can do whatever you like with it!

thanks for making QLD no. 1

nice work

hrd-hr30 Grand Master

hrd-hr30

Posted
Posted
I have finally got the operating manual for the GTR 4WD Controller I am building almost finished. A few guys have been interested in the controller as it has been seen at my track days being tested. The White R32 GTR, number plate 'cut' was testing it (came 2nd on May 2) ...

is that Rejon?

anyway, I'd be interested to see/hear more about this controller too.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What brakes on R34 GTT(Europe)

      By Dose Pipe Sutututu · Posted

      Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...