Jump to content
SAU Community

Recommended Posts

Just found out something curious

Officially, stageas have less power at the flywheel stock than R33's.

Skyline http://english.auto.vl.ru/catalog/nissan/s...e/1996_1/21671/

vs

Stagea http://english.auto.vl.ru/catalog/nissan/s...a/1997_8/21850/

Why the hell did they detune the stagea when its 300kg heavier!

Link to comment
https://www.sau.com.au/forums/topic/126625-stagea-vs-skyline-std-power-figures/
Share on other sites

Nissan decided that the S1 auto gearbox needed some protection from the heavier weight

The manual (S2) Stageas have the same power as (R34GTT) Skylines

But what about S2 autos and R34GTT autos?

:D cheers :D

Edited by Sydneykid

Somewhere in Skylines there is a comparison of a Stagea, (S1 or S2 I dont know) and two or three other FI cars. The Stagea did better than some. Perhaps someone (SK) knows what thread.

According to this: http://english.auto.vl.ru/catalog/nissan/s...a/2000_6/21829/

The S2 Auto and Manual both have 280ps, which doesn't surprise me too much.

I was under the impression Stagea rb25det runs a little less boost that R33 versions. Like 6-7psi Stagea, 8psi Skyline. Although that would imply different ECU maps, otherwise, based on Stagea AF's, the Skyline would be too rich.

It's just a different calibration to protect the auto. The autos break! Heaps of cars are detuned for the auto variants. The Stagea is detuned a bit more than the skyline auto because it id heavier and AWD.

yea true the detune it cos their auto gearbox cant take it. This is also true for an Rx8 an uto the rev limit is at 7k where the manuak goes to 9.5k rpm.

well, i really dont think 10kw difference will kill an auto box....

but hey, we've all worked out an extra 60-70kw can :cheers:

More likely the 20 nm of extra torque

Regarding boost, our Stagea came with 4 psi / 6psi (high / low)

The R33GTST came to us with 5.5 psi / 7.5 psi (high / low)

So my guess is the extra 1.5 psi of boost accounts for the torque difference.

Auto ECU’s and manual ECUs in R33GTST’s are definitely different.

When I swap the turbo on the Stagea, I will check the wastegate actuator spring pressure. If my guess is correct, the Stagea wastegate spring should be ~1.5 psi lower than the R33GTST spring.

:ban: cheers ;)

I always thought this was just down to slightly different configuration between the two cars.

To use another example, look at where the VQ35DE engine is used, its in like 5 different nissan cars (probably more), including the 350Z, stagea M35, maxima, skyline v35, patrol?, and there are sure to be others I've missed.

In all of these cars the power figures differ - either in kw or torque or both.

I figured it was just that the setup is configured differently depending on the purpose or the target market of the car.

Sounds like the same theory diesel engine manufacturers have.

Most common rail deisels will produce a difference of up to 200 HP from the same motor simply by programming the ECU. You simply tell them what you want the motor to do and they'll program it for you.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I dunno about that as a blanket statement. Pitwork is Nissan's "Nissan genuine" thing, and for stuff like timing belts, I have found them to be excellent. Of course, for things like oil filters, you always use proper trusted brands anyway, not whatever the OEM has taken to using.
    • Ahhhh... If you were putting 12V to the led in there, that's likely made it very unhappy. Chances are how you put power, was 12V across an LED that's meant to only have about 20mA through it at peak, and a forward voltage of about 1.8 to 2.4 volts. That circuit is likely only a 3V3 circuit, and will have a resistor in series with the led too. That's my guesstimate on that light, without having touched one.
    • Another vote for installing them and see how you go.  I mean, you already own them, why would you not fit them? 
    • I have had too many of those over the years, my cars have a toolkit or at minimum a cheapy multi tool thing because its too easy to be snookered by some stupid plastic clip that stops you checking the battery terminal isn't loose.
    • Basically, if there is a part# on the nissan catalogue, it is a genuine part. There is a thing called "new old stock" which is stuff made years ago but never sold (or landfilled), but it is super hit and miss what you can buy. Other than some expensive Nismo stuff there is nothing new being made that suits these cars. The only time to be a little careful is (mostly in the US I think, but maybe Japan too), Nissan started rebranding some cheap crap maintenance parts like oil filters as "Pitworks"; stay away from them, if you are buying cheap just buy whatever the local car parts shop carries The three part numbers have an explanation on Amayama: 0V005 is auto, base style 0V015 is manual 0V505 is auto, hectic momo branded ones, maximum F&F points there!
×
×
  • Create New...