Jump to content
SAU Community

Recommended Posts

yeh good call boostzor (was my idea too remember hehe:D )

im definately in, just make sure it aint raining.....

radium, i was gunah go down this weekend with a mates 300 and a soarer but will wait and well go with u guys a week later if ya want, then well have heaps of imports for racing!!

Link to comment
https://www.sau.com.au/forums/topic/1267-late-nite-meet-2am/#findComment-25373
Share on other sites

Yeh we will try to keep it safe so no monkey business

(unless the occasion calls for it):(

But this was just an interest thread at the moment im just figuring if any1 would go and it look like they will.

Every time i call the panel shop it seems to be a week later so i was thinkin Sat the 20th cause its the next free Sat i have and then i wont get another for a while.

We wont go to mundaring for 2 reasons

1)dont know the roads and the surfaces are bad.

2)if god forbid something does go wrong i dont wanna be in the middle of nowhere.

I will do some scouting when i get car back (and some testing)

Im not saying this is gonna be a kamikaze mission but its better than driving in jammed up traffic at 9pm:uh-huh:

Link to comment
https://www.sau.com.au/forums/topic/1267-late-nite-meet-2am/#findComment-25406
Share on other sites

I never said i wanted to "cut sick"

And if the north mole is what i think it is then u must be totally crazy!!!!!!

Is it the 1 1/2 lane wide road with big rocks on one side and water on the other?:eek: death central no room for error there at all.

Link to comment
https://www.sau.com.au/forums/topic/1267-late-nite-meet-2am/#findComment-25417
Share on other sites

Call me pedantic but i like open roads in groups

ie freeway that way we can all go at our own pace.

Preston point is a bit harsh with someone who dont know it well in front of you. It also kinda outta the way if we meet at city west as usual. I was considering that armadale run that i mentioned.

i hate lights:)

But ill take it under advisement hehe;)

Link to comment
https://www.sau.com.au/forums/topic/1267-late-nite-meet-2am/#findComment-25454
Share on other sites

Oh i see now yeh that is a decent spot but they put medians everywhere and the cops go there all the time. Just for such an occasion and then its defects for all.

My local favorite is "sheilds crt in myaree" if any1 knows it

Link to comment
https://www.sau.com.au/forums/topic/1267-late-nite-meet-2am/#findComment-25465
Share on other sites

Heya guys i will be in that!!

2AM would be quite nice... no traffic... not as many cops... nice cool air! SOUNDS SWEEEEET!!!

Yeah i am not too good with this whole "Mole" thing goin on (as i am from Joondalup way) but i think some of you guys were on that cruise where we went to freo and lined up all our skylines and a few pics were taken, there was a family fishing and the kids were looking at all our sweeeet cars! that was quite a big car park which had some very quite roads leading up to it! however as mentioned there was a lot of rocks and water on one side.... still there was a big car park if anybody wanted to give us a show and tell display ........

Anyway count me in i am now up to 240hp at the wheels from minimum mods so i am eager to go for a cruise preferrably in dry wheather!

Dump pipe

Down pipe

Hi flow cat

SAFC

11psi

air intake

BOV

238HP at the wheels!!

1 bordering bald G-Grid II tyre due to to much over cambering :-)

Link to comment
https://www.sau.com.au/forums/topic/1267-late-nite-meet-2am/#findComment-25842
Share on other sites

The standard rule of "if it rains its off" applies.

No point driving in the wet. Specially with the big "cold air intake" i put in the weather sheild. Basicaly a big hole that sucks air/rain:uh-huh:

Map is yet to be refined but this is a basic idea:

Freeway down to armadale road

Stop at maccas carpark to regroup (and eat of course)

Across scarp to whelshpool

then maybe down the pipe to finish off (possibly leederville carpark)

disband from there (hey at least northbridge will be close so you can go for a "clensing ale" before off to bed.

Any suggestions?

just rough guide atm

Link to comment
https://www.sau.com.au/forums/topic/1267-late-nite-meet-2am/#findComment-25865
Share on other sites

RB midnight cruises leave at 12 and theres no-one on the roads then.....

it depends on where you go as well, were going to armadale or whatever therell be no-one out on the roads at 12 in those areas....

2am is pretty early in the morning i reckon, means you dont get home until 5....

Link to comment
https://www.sau.com.au/forums/topic/1267-late-nite-meet-2am/#findComment-26176
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...