Jump to content
SAU Community

Recommended Posts

I am aiming to make my car capable of running flat 14's but have had some conflicting advice on how to do so.

Was wondering if any ppl on here had similar powered cars and if so exactly wat mods u've done to achieve this.

So far I've heard u need:

1:

Full exhast with 2 chambers dump pipe

FMIC

POD

Boost to 9PSI

2: All of above plus Z32 aiflow meter

3:All of above + PowerFC or GREDDY equivalent

Plz keep in mind i dont wanna F$%K my stock turbo so i wanna run 14flat safely without doing any damage

Can ne1 help?

Link to comment
https://www.sau.com.au/forums/topic/127073-14-sec-r33-gts-t/
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Full turbo-back exhaust (3inch) - $1000

Replace standard panel filter with a K&N Filter - $100

Bleed valve (10-12psi)- $100

FMIC - $1000

Adjustable exhaust cam gear - $180

= $2,380 + fitting

This should give you up around 180rwkw with a healthy engine. Using decent quality roadworthy standard size tyres (225/50/16) you should be able to do consistent 13.5-14.0 sec with a 1.9-2.0sec 60ft at around 100-103mph, the rest just comes down to driver ability and how long your clutch will last.

Edit: You won't need an Apexi PowerFC, but it certainly would help and you certainly won't need a Z32 AFM (until you change turbo's atleast but by then you will also need a new fuel pump and injectors).

Edited by benm

If you run it at 12psi all day every day you may experience problems but for 14sec a few times every now and then you wont have any problems.

Your clutch will be fine.

Do a search for the Exhaust cam gear, plenty of info available including a thread I created with before and after results.

I did a 13.2 running my car the way how it is:

hardwalled circuit semis. Rock hard coilovers. lowered quite a bit, so too much negative camber affecting traction (-2.5d).

12psi. full exhaust. stainless steel magic cat. No aftermarket ecu.

twin plate clutch with lightened flywheel.

I must admit though, I am really crap at drag racing. If it wasn't for the twin plate, I woulda probably killed the stock clutch in one outing.

PS: I run 12-13 psi all day everyday, and I don't drive it easily. It is still strong after 2 years, and god knows how long or what boost the jap owner ran it on.

I don't see any problem in blowing the stock turbo. They're cheap as chips (around the 3-400 mark for an r33 turbo). I'm happy to blow it and change it myself.

PS: I run 12-13 psi all day everyday, and I don't drive it easily. It is still strong after 2 years, and god knows how long or what boost the jap owner ran it on.

I don't see any problem in blowing the stock turbo. They're cheap as chips (around the 3-400 mark for an r33 turbo). I'm happy to blow it and change it myself.

Yea but u could blow ur engine in the proccess of blowing turbo, i'd be carefull

Mate as you can see in my sig, i have done a 14.04. the car is virtually stock, the mods i have are dump pipe off turbo, 3inch exhaust. thats it really. I run stock turbo, stock FMIC, stock ecu and standard boost. Ohh and that run was on shitty falkens 326's, worst tyre ever!!! well maybe not worst but damn close.

2rismo, I understand that you have extensive experience, and i've been following your progress.

Every car is different. I understand that some cars like benm's was only getting 14s with around 200rwkw. There are others like that.

I can only offer the experience I have from my car. Refer to above. With a catback, pod filter. stock boost. hardwalled circuit semis, I did a 14.01. I have a timeslip at wsid to prove it.

Then with the mods I mentioned above, I did a 13.2. My car is totally not setup at all for drag with the rock hard suspensions, lowered, way too much neg camber. But that's just what my car did. Maybe it's a freak?

I can tell it's definitely the stock turbo, because when I changed the dump, I verified that.

Every car is different. I understand that some cars like benm's was only getting 14s with around 200rwkw. There are others like that.

I call that driver ability, i'm now only doing 12.3sec with a 310+ kw gtr when I should be doing mid 11's.

Edited by benm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...