Jump to content
SAU Community

Recommended Posts

i think its because the surface is more grippy..?

i think it was more because it was so rough, where as the skid pan is flat and smooth, that basketball court was just ashpalt, the kind of shit that tears ur knees and hands apart when you fall over playing basketball at school during lunch :)

  • Replies 112
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I also used my everyday tires but their wear is entirely my fault as i was fairly smoking it up. Its mainly the outside of my passenger side tires that copped it so ill just switch them round and keep the wear on the inside

Dezz - i didnt take it as having a go :) dont worry.

Its graded surface as opposed to the polish concrete on the skid pan.

So grippy indeed, but wet you'd think would've reduced it. It did, but not enough as we had first thought.

Dezz - i didnt take it as having a go :P dont worry.

Its graded surface as opposed to the polish concrete on the skid pan.

So grippy indeed, but wet you'd think would've reduced it. It did, but not enough as we had first thought.

also, another pointer, by the time my group (group A) got over there, it was getting pretty dry as the first 2 groups had already had their shot on it...and it was a bit sunnier as well :)

foz out

lmfao...

as everyone has said, thanks to all the organisers for the day.. I had an awesome time also.

And ash, my tyres were fine all day until the wet course where I destroyed my left rear tyre (because I kept drifting in the same direction) and chopped up the front left tyre a little from understeering....

which leads me to my question: Can doing what we were doing yesterday alter the cars alignment?

Because my car is now pulling really hard to the left, sam and taco might have noticed on the ride home.

I don't know for sure if it's an uneven tyre wear thing yet (as one side is more worn than the other) as I haven't put my old tyres back on yet, but when I let the car counter steer it'self.. by letting go of the wheel it was hitting opposite lock quite hard (don't know if this could affect it or not)...

yeah, well before mine went ever so slightly to the right cos my castor's little f**ked, but now I have to actually hold it straight..and the minute my hand starts getting tired..... <-----

maybe it's nothing, I'll start complaining if it still happens after my proper tyres come back on...

next time do you think i should take the munro onto the d4d thingo ???

considering my handbrake barely slows the car down etc ...

ummm

hang on, i dont think ill do that, nope ...

ill be signing up as an sau - ee after i get a bit more of my car sorted out ... so ill be pissing off ppl most likely ... and hear whispers on "what the hell is that peice of crap doing here'

hehe

bring on deca btw ... i have a helmet, booyah

this was my first ever sau event, had a great time thanks to organisers. definatley getting a locked diff before the next one though. think a lot of people were struggling with open diffs. even the instructors were struggling with getting 33's with stock diffs going. great day though, be good if it wasnt so far away.

thanks again.

yeah that was me. left the spacers on how embarrasing :P i put them in friday night in the dark. lucky someone told me though, it would have come off otherwise. what were you driving dezz met so many people cant remember any names.

yeah that was me. left the spacers on how embarrasing :P i put them in friday night in the dark. lucky someone told me though, it would have come off otherwise. what were you driving dezz met so many people cant remember any names.

dezz had a black series 2 with gtr wing and stock rims

Does anyone have any photos of my car (white S14a) by any chance? I was the one who ran over about 2000 cones on the "free for all" run at the end of the day due to lack of coordination haha

If anyone has any pics/video's i'd be keen to see!!

Great pics BTW :P

Theo

Edited by madgrk

What a tops weekend...

Although it was a fairly cold day i think everyone enjoyed themselves and was great to see some new faces getting out there and giving it a really good go..

Thanx to those that gave me a ride through out the day was tops.. Geoff your GTR sideways was super cool :wub:

Poiter bad luck mate hope it’s nothing more serious than the obvious fix.. Time for a super aluminium radiator :action-smiley-069:

And again top work ash on the bbq as always…

Also Big thanx to James for the lift up and Sam for the ride home thanx guys…

I had an awesome day, even though my diff only let me do single spinners all day and that's about it. Most of the instructors were awesome, expecially Matt Sampson from Fulllock Motorsport who i learnt way too much stuff which is gona get me into big trouble =)

Thanx to the organisers, cant wait for the next one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...