Jump to content
SAU Community

difference > R33 4 door and 2 door

DennisRB30
 Share

Recommended Posts

DennisRB30 Community Regular

DennisRB30

Posted
Posted

Hi. Does anyone know what the differences are between a R33 GTSt 4 door and 2 door (besides the obvious addition of 2 extra doors ) weight etc. My brother has picked up a nice 4 door auto for only 11k (barstard :D)

Would an exhaust from a 2 door fit on a 4 door. If not, could it be easily modified to fit. I ask because whole exhausts are commonly available from import yards for reasonable prices, but I recon I would be hard to find one for a 4 door. I’m not sure about differences in wheelbase etc between the two.

Cheers :D

Link to comment
https://www.sau.com.au/forums/topic/12736-difference-r33-4-door-and-2-door/
Share on other sites
kik-ass Collaborator

kik-ass

Posted
Posted

4 door is slightly longer after the rear wheels. I have a Trust cat back off a 2 door and although it bolted right up , it is too short and sits under the bar instead of sticking out. When I have the time I will get it lengthened because it is discolouring the paint around it

surreal Community Regular

surreal

Posted
Posted

The four door is marginally heavier, like 30kg or thereabouts.

This is a way small penalty to pay for the extra conveniance of increased access (yeah, yeah, dosen't look as cool, rah, rah - I have people in the back all the time).

The boot is also a touch bigger I believe.

Oh, and I love the fact most bogans can spot a Skyline, but the four door usually throws them ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      spot the stagea

      By Duncan · Posted

      roof rail delete used to be a thing, they were made locally for a while too
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • GTSBoy
      R34 25GT Engine Light 21

      By GTSBoy · Posted

      If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...