Jump to content
SAU Community

Recommended Posts

ok quick replies to questions today.

N1GTR. no the hose clamp will not be included in the packet a i am not gonna be postin them out, but the hose clamp it self should be bout 40cents at any hardware store or automotive shop and will be of size 12mm to 18mm as this is the size i used.(i "found" mine at work though hehehe)

SATANIC. the differences would only be in the thread size of your sump and as it states in the listings of engines on page 3 of the thread that most nissans are the same, a for the number tag it would be to identify you as the payer when the deposit is made, for example say they allow you to only put a string of numbers next to the deposit receipt number, some banks allow letters and numbers so that the payee can tell who it was that deposited the cash, somethin like this

deposit of $41 from satanic(real name) at blah blah bank on this date receipt number 6549613 with number tag 55689.

you then pm me with the details of the transaction/amount/receipt number and the number tag you put with it so i can identify you as the payer when i check the balances etc.

hope this makes it a bit clearer for ya but if not lemme know k

Edited by oxford1327
  • Replies 107
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Hi Guys,

Just thought I'd check on this group buy and answer a few questions.

Thanks to Oxford for setting this up. I'm sure you guys will enjoy the valve.

A lot of questions are answered here http://www.fumoto.com.au/info.htm

Some of these questions have been answered, but I'll confirm the answers.

Yes I'm in on the group buy... can you find out if the nipple is removable?

There are two versions, non-nippled and nippled. The nipple is cast into it so, no, it's not removable.

Interested, but id like to know how hard the spring that holds the arm is So there is not a chance of it swinging open by itself

It's double-action, so you have to push it "up" then across through 90 degrees to have the ball valve completely open. It is still quite stiff. No way it would open due to vibration or hard jolt.

Will these fit an RB26, I remember reading somewhere that the magnetic ones you get don't fit the 26's sump, are these the same or are there different parts for each?

Unless the sump drain is recessed or there is a cross member/ sway bar in the way, there will be no problem

fitting the valve. Take a look at the pics and you will get an idea of how it mounts. These are not magnetic in any way.

All late model (1990 on) accepts F-103 (12mm-1.25). Pre 1990 - F102 (PF-3/8). Please check your sump plug if unsure (yes, it will be a pain, but you only have to do it once).

Will also fit RB25.

For honda s2000

Please note, Honda S2000 takes an F-106 and requires an ADP-106 (adaptor to allow the valve to clear the sump). This will add significantly to how much the valve sticks out, please be aware of this. I estimate 40-50mm in total.

does the lever have to be held open?? or does it lock into place??

Locks open so you can leave it to drain.

Can you find out what postage costs are - I'm in Perth...

Standard delivery charge to anywhere in Australia for any quantity. Included in your price.

one question. since its a ball valve and its underneath. exposed to dirst, water ETC. Will the ball valve works in the long run? if this matter is clarified i want one as well. Will it fit the RB26 engine ? Let me know.

If you get crap in it, hose it down, it won't mind. Stainless steel ball. If it leaks, I'll replace it...even in 10 years. Keep your receipt.

another quick question. Will the quick realease valve be sticcking out abut 1/2" to 1"? If one has tje car low will it be risking of hitting a bump with the valve and rip the whole thing off? Let me know

In total, it should only be sticking out 10mm more than your sump plug. As well, it will be on an angle so the actual distance from the ground is not excessive.

oxford are you able to put up a list of motors that this fits please?

http://www.fumoto.com.au/sizes.htm

Can it come with this? (Hose clamp)

Personally, I don't think you will need it (unless you go offroad in the Skyline), but for your own piece of mind, you can add a hose clamp, or use a small (1-2mm thick) cable tie. I can include some cable ties in your group buy (Oxford - please remind me).

Any other questions, please don't hesitate to ask.

Cheers,

Jack

fumotovalve.jpg

fumotovalve_cutout.jpg

n_valve.jpg

EDIT: Had too many quotes.

Edited by Fumoto
Yes i read the whole thread and by the look of the chart on page 3 they will fit SR20

But just want to make sure, Will these fit a SR20?

If so you got another.

Yes, they fit SR20. Same F-103

Oh, in case everyone didn't read my reply to Oxford on the first page, the prices are for F-103, non-nippled. I assumed that everyone on Skylines Australia would be getting one for their Skyline.

If you are getting one for a car other than a Skyline, please check the part number and price for that vehicle and let Oxford know. If it is originally $49, then you will get the same discount. If it's more, or you need an adaptor (eg. Honda S2000), then the price will be different.

You should check your bank to make sure payments have arrived..hahaha I put in the wrong account number, lucky it came back to me :O

All fixed up and Paid with the correct account today :laugh:

Alright well I took a look under the front of my Stagea and lined up what it there and at what levels and here is my interpretation:

post-7853-1155767852.jpg

So here are the explanations:

RED - This is the bottom most part of the lip on my front bar

YELLOW - This is the bottom most part of the actual front bar

GREEN - Front part of the front subframe

BLACK - I dont know what the name for it is, but it s huge thick peice of metal that runs just behind the sump

PURPLE - The Sump itself

BLUE - The sump plug

So yes if anything hits the sump plug it's going to hit that big black thingy too, but I noticed that there is a small hole in the subfram bit that runs in front of the sump plug, so I might just bolt a peice of 5mm thick steel there that protrudes down a bit o add that little bit of extra protection.

Does it cost extra for the nipple version?

Alright well I took a look under the front of my Stagea and lined up what it there and at what levels and here is my interpretation:

post-7853-1155767852.jpg

So here are the explanations:

RED - This is the bottom most part of the lip on my front bar

YELLOW - This is the bottom most part of the actual front bar

GREEN - Front part of the front subframe

BLACK - I dont know what the name for it is, but it s huge thick peice of metal that runs just behind the sump

PURPLE - The Sump itself

BLUE - The sump plug

So yes if anything hits the sump plug it's going to hit that big black thingy too, but I noticed that there is a small hole in the subfram bit that runs in front of the sump plug, so I might just bolt a peice of 5mm thick steel there that protrudes down a bit o add that little bit of extra protection.

Does it cost extra for the nipple version?

Yes, the nippled version is $4 extra. Unless your sump drain hole is behind a sump guard (and you couldn't be bothered taking the sump guard off every time you change the oil), you don't need the nippled one (to attach a hose to). Just open the valve and let the oil drop straight down into your oil pan.

Yeah I would rather attach a hose but that is just me :rolleyes: for ~10% extra on the price, just for the nipple........ meh I can do without.

How much are the units normally without postage?

Horses for courses. Just be aware that the nipple adds an extra 18mm to the valve's length.

Non-nippled with out postage is $49, nippled $54. Postage is normally $7

So at $41 delivered, that's not a bad deal.

Sorry, no defensiveness intended. I'm here to answer all your questions.

And you've done well - well done and cheers for the group buy (Ox and Fumoto)

the big black steel bit you are referring to ska is the main crossmember for the front section of the chassis.

in the pics i took under my car you can see the crossmember just behind the drain i have installed, so this should give you a clearer indication of where it will be situated once you install it

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...