Jump to content
SAU Community

Recommended Posts

hi guys just got home, picked up the cat and pipe from the GPO and the guy was like thank god its taking up a whole shelf lol. then he picked it up, aimed it and yelled BAZOOKA!

cheery faces all round thanks heaps it looks absolutely awesome a fair bit of work by the looks of things. hope it fits easy

thanks again

  • Replies 91
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

got mine yesterday...

didn't come by registered though just normal post.. not that i care because it arrived :D

having it installed friday hopefully...

will let eveyone know a comparison to how it was with the 3" bellmouth previously

got mine on last night. lined up perfect thanks again mic. got a nice whistle note to the exhaust now and got an extra 1.1 psi boost increase when running 9 psi. used to peak at 8.8 now at 9.9 psi so be carefull if your running higher boost :D

got mine fitted today, sounds a lil louder than usual, thou i dont have a cat back yet...

The dude charged me 190 bucks, i think i was ripped off badly, oh well its on now, he had to add like another inch of pipe cause it wasnt fully connected up, so i donno how that works out... Neways still very happy with it and it looks great!

maybe coz you got a 4 door car, so the lenght of the exhaust should be longer?? to connect to the cat??

Hmm 190 seems ok.. If the bolts snapped off or something then they charge more. its basically all labour. Took me 3 hours or so.. Or i think it was 4..

But still need to take it out again and heat wrap it..

What do u guys use to heat wrap it?

I was just about to bring this up - have people done it or not?

went down to autobarn and they sell some - looked a little dodgy though and $20 for like ~5m. Is it really needed as Ill Ive heatwraped up id the larger of the spilt pipe all the way down to where the smaller pipe joins the bigger one.

So should I spend another 20 and get it all wrapped up?

yeh i think it is cause i got a 4 door, the length would be a tad longer... but yeh i suppose i have no complaints over the installation, better payin a lil more for it to be working fine than paying less for it to stuff up

Well depends if you need to heat wrap it..

Mine is touching the aircon pipe.. The aircon pipe contains gases. SO think about. The pipe touch the aircon pipe in summer with high temps for long periods of time. Sooner or later its just gonna melt that pipe or make a hole. I will leave the rest to your imagination.

But if your wastegate pipe (the smaller pipe) doesnt touch the aircon pipe then it should be fine i guess..

Should be about 50 bucks for a decent quailty one tho.. Any exhaust shops should have them.

Im gonna heat wrap mine up b4 summer really hits. So most likley mid sept. Or i might have to relocate that air-con pipe.

Keep you posted i guess when i get mine done.

Edited by siddr20

Got mine fitted today, car is alot more responsive to say and the topend has picked up quite abit too.

Just wondering though: did anybody else have their wastegate split pipe VERY close to the gearbox? Mine is actually TOUCHING at the moment but the dump flange lines up with the turbine perfectly. Theres no rattles and bangs when driving at all, but I'm still abit paranoid - can anybody confirm this is ok? Michael?

Thanks,

Andy

got mine fitted yesterday

previously i had the 3" bellmouth and ran 14psi to make 155rwkw

with the 3" split, i ran 13psi to make 170rwkw :rolleyes:

that's 15rwkw at 1psi less! dyno graphs to prove if anyone needs...

oh, and the split pipe runs on the opposite side to the gearbox on the rb20.. mine almost touches some aircon lines but they are insulated so its all ok..

OnGsTa,

Check the pipe to see if it has any indentations at the point that its touching. it will most likely not be a problem because the R34 dump & front pipe is bolted not only at the turbo flange but also has a bracket that that gets bolted to the car just before the cat, so there will be no movement/friction against the box.

WazR32GTSt,

Thats a great difference! Thank you for sharing that information :rolleyes:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I drive the Tiguan much harder than the Skyline in all conditions, because it just grips and hooks, unlike the R33 shit box
    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
×
×
  • Create New...