Jump to content
SAU Community

Recommended Posts

Going to the v8race (http://www.v8race.com/) around e/c. i have about 7 laps on the track(smaller track i think?).

Just wondering if you guys had any tips before i get there in regards to driving technique and how it differs from the track. Like the basics of steering wheel grip and control to picking the correct line. im a first timer to the track, so any tips would be great. From what i have heard, these cars are close to stock engines, stripped, with suspension and slicks.

What times should i be getting, and i will tell you the result after i run.

Oh and which car should i go ford or holden? hehe

Link to comment
https://www.sau.com.au/forums/topic/128309-from-street-to-track/
Share on other sites

hi mate, it looks like they run a shortened track. i've never seen that layout used before so I have no idea what times you will get. and I would say with only 5 laps dont worry about times at all (doubt they will time anyway).

just have fun.

The guys there give you driving instruction, so you should be fine.

The biggest thing to remember about track driving is to be smooth. You always go faster when you relax and do stuff deliberately rather than just jerking and sawing at the wheel, fighting the car.

Like Baron says, I've never seen people use that EC layout. I didn't even know you could take Turn 4 like that as a part of the circuit.

Well in that case im glad i didnt already know the track well and actually turn there instead of going straight! I will probably take it real easy and just get the hang of it. would be embarrassing to go off the track. nice and smooth, ok. i cant see how i wont have fun.

I did this thing about a year ago. Pretty cool. the shortened track is a bit tricky coz it falls out from under you at the point where it cuts to the hairpin

The cars are pretty good. Big Brakes..stiff setup and plenty of power. There is shitloads of grip in the cars so dont be afraif to go WOT in the middle of the hairpin. Make sure you get the video option for like $30. You get to see what your face looks like going WOT down the straight. :-) If you know how to heel/toe then remeber to do that. The clutch is nice and bitey on the downshift

Alright just got back from the arvo session. Let me tell you it was a an awesome experience and heaps fun. The in car co-driver was pretty good and helped heaps and they set up witches hats so you know where to aim and start braking.

Yeah the track was a bit weird where they cut it from corner 4-9. i was like 'which way do i go' and he was going 'straight. go, floor it, floor it.' they really want you to go fast and have a good time. Those slicks were great, had heaps of speed through corners and they bit hard.

i got the tape, i have to watch it now. have to get it converted to digital as well. I was heel/toeing through it and he said that i done it really good, with good technique. i was pretty rapt as theis was my first circuit race, and have only practiced on the street and watching dvd's with incar cams.

Yeah i got in the champion ford, and the guy goes 'good choice because this is the most powerful car running, with 450hp'.

And towards the end, you start to get comfortable with the car and track. i actually caught up to the car in front.

Highly recommended!

Edited by lastlineofdefence
Highly recommended!

Not quite methinks....It's good to recieve as a gift from someone else but I wouldnt recommend it as driver training Vs value for your own money. Take your own car to the next SAU track day and I'm sure there will be heaps of guys who can show you the lines while you figure out the limits of your car. Last track day I went to I went out 6-7 times. A stock skyline can handle it....if you treat it right.

Yeah that would probably be next. ive done it now, so wouldnt do it again in a hurry, like gold class cinemas, but it was just a blast to thrash around a (close to) race prepped car and not have to worry about it.

Pretty keen to hit a track again, whether it be circuit, drag, skids...

wakefield speed days are also a great way to learn the ropes.

Occasionally you can get an extremely empty track and have a muck around without getting in anyones way. Going there with someone who knows the circuit can also be a massive benifit.

Im heading down next week if you have a day off and wanna come for the run.

Getting down and back is not a problem.

I tow or drive depending on which GTR im taking.

Next week ill be towing the car down cause I want to try out the new slicks and driving down there will total them.

Its pretty hard to break anything serious enough to make it undrivable but your welcome to come with and use the trailer to get it home if you break something!

Check out the wakefield site www.wakefieldpark.com for licencing fee's

Helmet is not a problem, ive got a few spares you can use as well.

Brad

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...