Jump to content
SAU Community

Recommended Posts

You need a S2 bonnet and grille, the guards are the same. Do a search.

But why bother, you can fix up the head lights (search for this too) and you have a S1, I dont understand why you'd want to turn it into something it isnt. Also the S2 headlights do the same after time anyway.

I wouldn't say they're better in any way. They look better with the S2 front bar as they're a bit newer, however the GTR kept the same shape through the entire GTR series, the only update they had was the xenon low beam.

If your going to spend several thousand in converting to S2 headlights, front bar and bonnet, why not buy some S3 GTR xenons.

I wouldn't say they're better in any way. They look better with the S2 front bar as they're a bit newer, however the GTR kept the same shape through the entire GTR series, the only update they had was the xenon low beam.

If your going to spend several thousand in converting to S2 headlights, front bar and bonnet, why not buy some S3 GTR xenons.

Yeah but there is a bit of a price difference between GTST gear and GTR gear. Have you seen how much the series 3 xenon lights go for?? I think there like 2 or 3 grand new from nissan and around 1500 2nd hand.

Series 2 GTST lights wouldnt even be worth half that.

Chris

its still a waste of money doing a conversion imo

especially since the only reason for the conversion mentioned, is to get rid of that yellowy color which can be gotten rid of with a quick buff job.

i'll take before and after shots if i can find a before shot and show you the difference.

its still a waste of money doing a conversion imo

especially since the only reason for the conversion mentioned, is to get rid of that yellowy color which can be gotten rid of with a quick buff job.

i'll take before and after shots if i can find a before shot and show you the difference.

Agreed.

For the amount of effort and stuffing around plus the cost (say $2,000 to do it all) you could definately spend your money better in other ways. If you're not confident about buffing them yourself pay a detailer. The same thing happens to EF,EL falcon headlights so most places will know what they're doing and would cost $100 max.

Fixing your current headlights is easy, i had the same yellow tint happen to my S1.

Just buy some wax/polish, clean the headlights with water, dry it, then throw some polish over them. let it sit for a bit then wipe it off. Mine came out sparkling like new.

It's not just the yellow colour.

sII headlights have a clear lens with nothing behind it.

sI headlights have that outer lens, which has all gay patterns on it. Then it still has an inner lens. it looks pretty ugly.

The sII light looks all sparkly and nice.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...