Jump to content
SAU Community

Recommended Posts

Anyone know what happened with the old " final inspection" forum?

Hadn't even looked on there in years went back to try find some info on there new products and much to my surprise it appears to be no more?

Was a good source of info on their gear?

Edited by noone
  • 5 months later...
  • 3 weeks later...

Hi gents,

I have a 1998 silver GTT that spends her life outside. Can you please recommend a sealant for her to be applied with a hand applicator? Preference for durability and cost under $100. Cheers!

Use the duragloss products I mentioned in my last post, or Nanolex if you can afford it. My paint is still fine after 3 years of sitting almost constantly in sunlight. If I wasn't lazy, I'd do paint correction with some Menzerna products, but otherwise the 105 and 601 combo combined with regular washing and semi regular Aqua Waxing does the trick.

  • 1 month later...

I prefer and always used Maguires Polishes and Waxes ,

Now some will likely disagree with me but one of the very worst things anyone could do is polish with a power buffer or even by hand in circles ,
this will eventually lead to crows foot and other imperfections.

I ALWAYS polish along the line of the panel, ie Nose to windscreen front to rear along the line of the bonnet.
The Side Panels the same parallel to the ground.
The reason behind this you don't scratch the base in circles and it is much less likely to develop weird scratches and that of course creates horrid reflections and can make the car look shabby pretty quick.

Disagree with the power buffer statement too. If you use a dual action random orbital polisher for your polishing, you should end up with a swirl and scratch free paint surface, it's foolproof. Rotary polishers are the dangerous tools in the hands of the unexperienced.

Edited by tiddyd

Re: Bowden's Own

I've bought a few of their products just to see if they are any good and to support an Aussie business.

Seems to be on pretty much on par with the other off the shelf gear, they only used to sell at Autobarn but slightly cheaper now at Supercheap. The carwash and wheel cleaner are good, the tar remover is very good but tyre shine was pretty average. Very watery and leaked out of the bottle when I forgot to close the sprayer tip, something that never happened to any other product I've had so far.

I don't seem to have any of their products last long, just get used up pretty quickly so the value isn't quite there, plus they lag behind in some areas, like no paint correction products, or sealants/coatings. The quick detailer also smells like window cleaner (ammonia) so I'm a bit suss about the formulation.

Edited by junkie

I've only used their clay bar and car wash, which I thought were reasonably good.

I brought a whole bunch of stuff from WAXIT but somehow forgot wax/sealant, can't be bothered waiting again for delivery so I'm going to try an off the shelf product.

any recommendations?

  • 8 months later...
  • 6 years later...
  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...