Jump to content
SAU Community

Recommended Posts

hi guys

just wondering if those cheap ebay intercooler kits for our skylines are good????

has anyone got or used one of these kinds on their cars???

im interested in buying a front mount but i dont want shit quality or risk blowing my turbo.

any ideas/prices?

cheers

steve

Link to comment
https://www.sau.com.au/forums/topic/128494-intercoolers-which-are-the-best/
Share on other sites

The brand name jap kits will fit easily and nicely. They will probably use the existing piping so everything will look quite neat.

The cheaper kits e.g. JustJap will take some mucking around to fit. and have different piping.

I'd say the brand names flow better and are of better quality. They probably perform a little better too, but I dont know whether it warrants the price being doubled (or more).

Personally, I'd go a proper brand name kit.

The actual intercoolers themselves will have very little difference on performance (unless you're chasing big big HP).

Eg a Justjap FMIC will perform just as well as a Trust/ARC/HKS one.

However, the difference is in the piping. JustJap and other Hybrid copies are notorious for the issues they have with fitting (eg trimming of the rad fan needed in R33s) whereas the JDM kits will be much easier to fit and require less modification to go in. Also, I've noticed that the Justjap FMIC piping is pretty thin compared to the brand name FMIC kit piping.

ive always wondered why didnt cheaper kits (eg hybrid etc) just model their piping on the more expensive kits, thus save all this fuss? surely its be easier for u to just buy the core and get some custom piping (wouldnt be more than $250) made copying the pipingg route of the better brands?

ive always wondered why didnt cheaper kits (eg hybrid etc) just model their piping on the more expensive kits, thus save all this fuss? surely its be easier for u to just buy the core and get some custom piping (wouldnt be more than $250) made copying the pipingg route of the better brands?

They probably did and they had shit copying skills. :P

Get a GTR cooler. Less likely to get hassled by the cops (when painted black) and they are perfect size for medium mods.

can u get any of those cheaper intercooler kits with piping that conects to the original SMIC piping?

i rekon it looks neater, plus less hassles.

i no Blitz r selling a kit that uses stock pipes but thats going for around $1500 ! :happy:

How efficient in its cooling purposes say a bar and plate cooler compared to a tube and fin?

I notice that a lot of cheap coolers are usually bar and plate.

I wonder which one would be better as in summer here in australia, its a daily driver. Mind that you give it a little push everynow and then but no track days.

tube and fin doesnt cool as much but has less pressure drop, bar and plate cools alot more but has a slightly higher pressure drop, also the tube and fins from what ive been told will flow more air thru to ur radiator....bar and plate are used more common in cars that like to drag, i have bar and plate hybrid cooler

ben...

These days the price of good brand name cooler kits are so competitive, hence my signature, you can get a Greddy kit for $700, it comes down to preference if you want to go brand name or generic, i can't say brand names will allways be the better option, as sometime the same factory makes both, but i feel in 9 out 10 cases you will find the brand name is of a higher quailty.

Brand names now have made cheeper coolers to tackle this generic market, like Hyrbrid, Greaddy etc. and unless your chasing huge power these coolers are perfect.

Michael

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...