Jump to content
SAU Community

Recommended Posts

Thanks, could someone please tell me whether this vehicle I am interested in buying is a v-spec or not as it was advertised as one and has brembos etc but im not sure it is, would it say V-spec instead of GT-R in the FAST results? Thanks very much in advance :(

the vin check tells you the car is christal white (326) with grey interior (G), runs an RB26DETT GTR, 4WD & was built in March 93', if all of this adds up plus it has Brembo Brakes, Retuned ATTESA E-TS system & had 17" BBS wheels with 225/45/17 tyres at some point then you should be pretty right, im not actually sure if the R32's come up as GTR/V on the VIN FAST instead of GT-R or thats just the R34's? can anyone else confirm this?

Edited by azzafreddy
the vin check tells you the car is christal white (326) with grey interior (G), runs an RB26DETT GTR, 4WD & was built in March 93', if all of this adds up plus it has Brembo Brakes, Retuned ATTESA E-TS system & had 17" BBS wheels with 225/45/17 tyres at some point then you should be pretty right, im not actually sure if the R32's come up as GTR/V on the VIN FAST instead of GT-R or thats just the R34's? can anyone else confirm this?

yea 33/34 show V Spec, 32z only show GT-R or GT-R.17

2 check models in FAST type 'r32' in "Model series", click OK,

then the top right button out of the 8 Jap buttons (DU-AD)

cheerz

Can anyone provide either: a page that details which codes relate to which options, or in particular ABS on BNR32, or A VIN of a GT-R which came with ABS from factory using the 1inch brake master (not brembos).

Thanks guys.

Also could someone fast HNR32001765 for me :banana:.

Thanks again.

::Z54

definatly not, I'm not sure what the .17 indicates(I assume it'ssomething to do with 17"Rims), but they are the only 2 posibilities FAST can give

Can anyone provide either: a page that details which codes relate to which options, or in particular ABS on BNR32, or A VIN of a GT-R which came with ABS from factory using the 1inch brake master (not brembos).

Thanks guys.

your best bet is :- Decode Model Numbers Scroll down a bit

Also could someone fast HNR32001765 for me :thumbsup:.

post-68505-1269592945_thumb.jpg

Thanks again.

Cheers Bundy

Cheers bundy there is no mention of ABS on R32 GT-R model codes and on 33's it appears to be in the same position and the same letter as the 32s steering wheel designation *puzzled*

Similar information is here: http://www.skylinesaustralia.com/forums/Vi...amp;hl=decoding with reference to the original thread which has a dead URL.

It suddenly strikes me.. do all 32 GT-Rs except N1s have ABS?

Cheers bundy there is no mention of ABS on R32 GT-R model codes and on 33's it appears to be in the same position and the same letter as the 32s steering wheel designation *puzzled*

yea different models are decoded different. pita

Similar information is here: http://www.skylinesaustralia.com/forums/Vi...amp;hl=decoding with reference to the original thread which has a dead URL.

It suddenly strikes me.. do all 32 GT-Rs except N1s have ABS?

I think your on to sometheing there, had a look at Motor Traders (known verified info), looks like all 32 GT-R and GT-R Vspec (including V spec II) have ABS as standard, main options are fog lamps,drivers airbag and rear wiper in later models

cheers

Edited by BundyBear

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • But seriously, can we ask for the results of the "tip a bottle of metho into a nearly empty tank" experiment?
    • Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
    • Thanks @Duncan Ride height is fine. I think it's almost stock tbh. Happy to share a pic. I don't actually have a regular mechanic as haven't lived in Sydney too long. Could you or anyone recommend any shops in Sydney?
×
×
  • Create New...