Jump to content
SAU Community

Recommended Posts

They make bodykits out of mesh?

Fibreglass is cheap and light, but in most cases very brittle, after a while you'll get cracks and it will look like shit.

The OEM front bars are the strongest, because they bend, instead of cracking

FRP (fibreglass reinforced plastic) is what you should look for, but it's a lot more expensive than fibreglass, and usually only is available if you buy the original kit from japan

stock bumpers = polyurethane

of course fibreglass doesn't crack unless its been stressed...

but there's no doubt that its brittle.. even the stress of the chassis flexing when cornering over a long period of time can show on thin bumpers...

FRP sounds great.. anyone in oz make kits out of this??

you could probably get a kit made out of carbon fibre, but they would be weaker than glass.

a lot of mass produced glass kits are made really thin to save money, so they break easier.

the advantage of glass is that it can be repaired easy. i bought a front bar from a wreckers for $100 that was cracked down 1 side and it cost me $50 to fix it and repaint it (did it myself). the plastic kits cost a bit to get plastic welded, but they don't brake as easy to start with.

Personaly I love fiberglass kits as most aftermarket kits are fiberglass. I ve just finshed making a veilside kit fit a carmy 91 model (carby fed ) . It took 8 kilos of fiberglass but it looks very different .

Is anyone interented in seeing pictures?

why?

Well its not my job to ask why, it was brought to me and he asked me to make the modifications to make it fit to his car. I dont get to pick the cars i work on, its my job to fit the bodykit to it .

And also why not?

Im in the same boat and searching for a S15 kit perhaps the only way to get quality is to buy an origianal japanese kit ? im thinking about getting a kit from jetspeed or mxfly if all there kits are made of frp.

If this isnt a good idea feel free to pm a reason

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...