Jump to content
SAU Community

Tomei Hicas Lock Kit

CATKICKER
 Share

Recommended Posts

CATKICKER Mentor

CATKICKER

Posted
Posted

Hey Guys, I understand this has been covered and believe me I have searched but anything I find, the link is no longer availible...

I want to install my Tomei Hicas lock kit this weekend but the instructions are in ne hon go...

Can someone please point me in the right direction to find english instructions or wiring diagram?

Thanks for your help!!

Todd

Link to comment
https://www.sau.com.au/forums/topic/128604-tomei-hicas-lock-kit/
Share on other sites
T04GTR Grand Master

T04GTR

Posted
Posted

cool.

this is rhe procedure..

start the engine and WITHIN TEN SECONDS!! turn the steering wheel 1/2 turn LEFT hten RIGHT 5 times then depress the brake pedal 5 times.

this will put hicas into a diagnostic mode.(dont drive it)

it will take a few gos to get it. its hard to do all that whithin 10 seconds lol

when its inttalised the hicass light will flash. turn the wheel left and right asnd you can see the rear turn. use this procedure for inserting the shims into the rear steering rack(they wont fit otherwise)

as far as the electrics go ??????

R33S2 Grand Master

R33S2

Posted
Posted
Thankyou VERY MUCH! This should be in the DIY/FAQ section!

^I think copyright prohibits this.^

Can someone translate this for me? Please Phunky?

post-17300-1155249382.jpg

As the r33 plug looks nothing like the one shown on the PDF doc, Im having trouble choosing which wires to plug into.

post-17300-1155250188.jpg

I fitted the lock washers last night, I used a 12v source to move the rack (those screw are sooo tiny) and wheel aligned today, the light is on but it drives like a normal car with none of that tail waggle that I had to get used to when I first drove it, I prefer it like this and when/if I ever get the wiring colour codes, I will get rid of the light, I want it working as hicas also governs the power steer and hopefully it still comes on if there is a problem (touch wood).

R33S2 Grand Master

R33S2

Posted
Posted

Well after much searching I found this on a site.

post-17300-1155464764.jpg

I am guessing that the signal wires A & B are the wires on the rack that read the movement of the rack, without running out and looking, i know there are 3 wires on that connector, I can get an idea of which is which, I will have a look at it tommorrow and see what happens.

R33S2 Grand Master

R33S2

Posted
Posted

I did it! The pic is a wiring diag of the setup for a R33.

Thanks to all who helped with this Al, Predator, Shane, ColGTSX, Bl4cK32, Sav man and anyone else that I Pmed :rolleyes:

post-17300-1157887202.jpg

Disclaimer: This worked for me it is no guarentee that it will work for anyone else.

  • 4 weeks later...
alpinestars Experienced

alpinestars

Posted
Posted

hey guys

i went with the above post picture

and i got a 96 r33 series 2

i went with the wire harness guide and installed it as pinned out on the harness but either way i look at my harness in the middle section those wires indicated arent on there

in the first picture i have showed the wire which i have spliced into

the second picture is looking at it from other side also indicating how i have wired it

cheers much help is need before my care is running as i dont wanna ruin anything

cheers

post-16562-1157882755.jpg

post-16562-1157883030.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      spot the stagea

      By Duncan · Posted

      roof rail delete used to be a thing, they were made locally for a while too
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • GTSBoy
      R34 25GT Engine Light 21

      By GTSBoy · Posted

      If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...