Jump to content
SAU Community

Recommended Posts

hey dudez

just had my major service completed the other day

i had replaced:

timing belt

water pump

cam seals

spark plugs

fuel filter

now when just cruising around, i change gears and the car backfires, not really loud but has never done it b4. when i really give it a boot and change gears it is quite loud. now i have the car booked in to get a dyno tune and was just wondering whether this will fix the problem. and the car has always been out of tune a bit so im hoping this will get rid of it. it has always backfired on decellaration too, which i wasnt worried about.

mods to the car are 3" turbo back exhaust, FMIC, pod, bov and boost to 12psi.

thanks for your help in advance guys

cheers

jabba

Link to comment
https://www.sau.com.au/forums/topic/128657-backfire-after-service/
Share on other sites

i used nissan genuine plugs, they supplied them.

i just thought its wiered that i have replaced everything with new and now its doing it. never did it b4...

im not worried really but its rather annoying when u give it a boot, my car sounds sick.... :laugh: lol

thanks for your help dudez

its a turbosmart bov, so thats atmospheric yeh?

Edited by JVP-R32

yeh it has a silicone hose coming off the end

i think its a type 3...cant remember...

would a dyno tune help, im getting it done regardless, but when they fidle with the fuel and timing when they tune it, could this repair the problem? im getting an ecu chip done very soon also. when they replace the timing belts, does the tune go out of whack? sorry im a n00b at this.

thanks guys

Its just running rich? ie. the R&R that normally occures with std ecu? 12PSI? on std turbo everyday? damm

My car backfired heaps when I did a few more mods to it and uped the boost. It would backfire every gear change, every downshift, I was even able to make it backfire on demand. Off throtle and on throtle etc..

Sometimes it would backfire by itself 4times in a row! "ZOOOM POP POP POOOP POP"

You shouldnt have anything to worry about, just means car uses more fuel, and the cat might be rooted lol

  • 3 weeks later...

car still back-firing, new fuel pump installed (bosch 040)

plugs were genuine nissan, which cross referenced to PFR6A-11, as recommended on here....

could it be the coils?

the pop is really loud, can feel it in the cabin lol

just need some help, its doing my head in.

cheers guys

When is it happening.. coming onto boost.. or when you back off boost..

Is it happening ALL the time, or only after you have been giving it a bit of a run..

If it's a) backing off boost & b) after you've been giving it a bit - the excess fuel is just being ignited as it hits the turbo/exhaust causing it to pop.. not really a huge issue..

Not sure why you'd get a "Dyno tune" when the car has the stock ECU.. unless you think there is something seriously wrong I don't see the point.. unless you want to see how rich your A/F ratios are going..

Not sure how a new fuel pump will help..

Hmm.. trying to think of what else it is.. more details on when it happens would be good..

  • 5 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...