Jump to content
SAU Community

Recommended Posts

I remember asking you about your lack of roof racks, hey. Told me about your lil cf replacements.

if you want to know where so you can ask how to REMOVE them, ill gladly buy them after you do....

Find someone with a HyperRev magazine, I'm sure someone in our group has one (or both) for the Stagea. It could quite possibly be in there.

I wanna buy them both - Nengun has them listed @ roughly $33 each, but when you look at the "Delivered" price, it's almost twice as much!!! No thanks...

Hi Guys,

I too would like info re: removal of roof 'rails' and carbon fibre inserts

or just colour coded inserts, either way it would definatley make the car look lower

and just give the stagea a better shape.

If someone has a link to a place where you can purchase please let me know!

Regards,

Wade

I couldnt see any for sale in Hyper Rev Vol 67.

All M35's come with no rails - just a raised ridge where the rails were.

A lot of the Stageas featured in Hyper Rev had the inserts but I couldnt see any listed in picture as a separate sale item. I dont read nipponese so I dont know if they just come with the full body kit.

However, the cars that had the inserts were from:

freeway-dolpin.co.jp

impul.co.jp

altia.co.jp

happy hunting...

heya guys found em!!!!!

they are on page 114 of the hyper rev vol #38 by company called G SQUARE right at bottom of page in middle.

and in same book on page 52 from AB FLUG shows a series1 with no rails on it either but it looks like those ones are just caps but cos i cant read japanese i dunno what they are priced at

  • 3 weeks later...

i have a set of the eyelids for mine same as the ones from this site.

got em on ebay for $85 aus i think just gotta get around to painting them the right colour and they will be goin on

thanks for the brochure link

very nice.

hhmmmmmm ideas.. nah, would like to make it look good, but IMO all stagea's look good.

power & handling first, then maybe in a few yrs time I'll touch up the looks. stealth is good tho.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...