Jump to content
SAU Community

Recommended Posts

Im sick of looking for a gtr bonnet so now ive decided to have my gts-t bonnet CUT :rofl:

Has anyone here done it before does anyone know someone that can do it ???

I know it can be done cause ive seen some cars in yards with em

I need help im not sur how much trouble it will be

Link to comment
https://www.sau.com.au/forums/topic/128939-gtr-gts-t-front-bonnet/
Share on other sites

I think you're crazy. Unless if you are a metal worker. It would be a hard job...

Just saw one for sale on this forum for 300 with a few scratches and dints. That + paint/repair would have to be cheaper that cut/repair/paint. And you can sell your GTSt bonnet.

You cant read? He cant find one....they are way too expensive anyway, hard to repair too.

Its fairly easy. Got a mate who did this, mark a nice and straight line, cut it good with a grinder, bend the underneath up to the new cut area.

Rivet a piece of metal on the underneath so when u lift up the bonnet u dont rip the top skin off.

Glue a piece of thin rubber over the cut so it looks neat.

Job done...cheaply.

You cant read? He cant find one....they are way too expensive anyway, hard to repair too.

Its fairly easy. Got a mate who did this, mark a nice and straight line, cut it good with a grinder, bend the underneath up to the new cut area.

Rivet a piece of metal on the underneath so when u lift up the bonnet u dont rip the top skin off.

Glue a piece of thin rubber over the cut so it looks neat.

Job done...cheaply.

There are some in the for sale section. Wreckers will have them. If it's done cheaply without paint it will look.....cheap...

Also open the door for rust where the paint comes off.

Cool for a drift pig if that's what you're after.

I would be likely to think the "chopped" bonnet will be illegal.

Even down the bottom section there? Is there ribbing on a 32 in that area? I would have thought it was simply some folded metal, just extended more than a GTR bonnet.

I would probably buy a GTR bonnet though in all honesty, you dont want some half-assed GTS-T/GTR mockup that isn't even straight! I'd wait around till you find something you are happy with, unless you 100% need it by a certain date etc..

Good luck

i found one with scratches and dents

im thinking about buying it

but even the gts bonnet is hard to sell no one wants em anyway mine has a long scratch on it to so it needs paint i was thinking maybe get the panel beater to do it all for me

im still open to suggestions

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...