Jump to content
SAU Community

Lowered My Car

CATKICKER

By CATKICKER,
in Tasmania

 Share

Recommended Posts

CATKICKER Mentor

CATKICKER

Posted
Posted

I just chucked in my Bilstein height adjustable shocks and super low King springs.

All in all, pretty easy job!

Here is a pic of how it sits now. I have been waiting ages to do this and I love it!!

It is rubbing in the front so I will have a look at that today. It goes in for bodywork tomorrow so I will have any guard rolling done then.

I still have to install my other suspension gear (ajd front and rear swaybars, adj camber kits, adj caster kit and rear subframe alignment kit) and get an alignment.

Has anyone had experence with what it might be rubbing on? I am not sure that it is that guard... Might be the arm and could have to get some 5mm spacers for the front. I can't even get my little finger in between the rear tyre and the guard so that will need rolling/trimming.

Anyway, here it is. Any comments welcome.

P.S. Might be an idea to have a sticky updates section so people don't have to create a new topic for somethin like this...

loweredqd9.jpg

Link to comment
https://www.sau.com.au/forums/topic/129009-lowered-my-car/
Share on other sites
CATKICKER Mentor

CATKICKER

Posted
  • Author
Posted

Cheers guys!!

I had a look today and it is rubbing on the screws on the guard that holds the plastic inner guard on. It is also rubbing when turning on the inner guard so will have to sort it out.

I will post an update when I get the car back from the bodyshop. I am getting my front bar, bonnet, front guard, rear bar, boot lid and tail lights painted and having my boot shaved, front guards rolled and rear guards trimmed...

Link to comment
https://www.sau.com.au/forums/topic/129009-lowered-my-car/#findComment-2386821
Share on other sites
nizmokid Mentor

nizmokid

Posted
Posted
yea wheels are wheels to me. my best mate had dished volk rims with a $4500 price tag but they dont look much better than a cheap set. just what i think anyways. but yea car looks sweet.

its the weight of the 2 piece wheels and the build quality, sit them next to a set of lenso copys and you would just pay the extra!.....trust me I did! and they look sweet as!.....go the VOLKS! :)

Link to comment
https://www.sau.com.au/forums/topic/129009-lowered-my-car/#findComment-2391043
Share on other sites
grandmasterb Grand Master

grandmasterb

Posted
Posted
its the weight of the 2 piece wheels and the build quality, sit them next to a set of lenso copys and you would just pay the extra!.....trust me I did! and they look sweet as!.....go the VOLKS! :)

I can see your point and it is valid but at the end of the day you cant see the wheels when your driving and they dont make the car go any better.

Its purely cosmetic so i have never been a fan of spending big on wheels for my cars, but thats just me and my 2 cents.

Dont get me wrong they do cap off a car (like Todd's) but i can think of better things to spend money on first.

Todd the car looks great cobber, must make a big difference with the handling now!!!

What have you got planned now for the beast seeing as your always doing something to it :)

Link to comment
https://www.sau.com.au/forums/topic/129009-lowered-my-car/#findComment-2391525
Share on other sites
CATKICKER Mentor

CATKICKER

Posted
  • Author
Posted

Thanks B.

Well, it is in the bodyworks at the moment like I said so it will be looking spot on when it comes out!

I now have GTR injectors and the resistor pack and a Z32 AFM so I will be looking at getting a retune.

I am tossing up whether to get Dr Drift to do it again or to go aftermarket. I am about to investigate SAFC's... Can anyone tell me if I can add the new injectors and AFM and tune it up with that or would I need to go the PFC?

I am not looking at taking it to Melb to get a tune because it is going to cost too much and I may aswel spend the cash buying something I can have tuned down here! I am thinking about getting Sam to send me another chip with a map to suit the injectors and AFM and then get the A/F ratios checked on a dyno down here. If nessecary, I could always send the ratios up to him and he can adjust it best he can...

Any help or suggestions on this would be great.

I rekon there will be a little dry period in 4 weeks... I am going to be a dad :devil:

Todd

Link to comment
https://www.sau.com.au/forums/topic/129009-lowered-my-car/#findComment-2391966
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • funkymonkey
      Howdy Y'all

      By funkymonkey · Posted

      Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Dose Pipe Sutututu
      Starting again

      By Dose Pipe Sutututu · Posted

      Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • R33_Guy
      Speed Sensor replacement

      By R33_Guy · Posted

      Thank you so much for the help
×
×
  • Create New...