Jump to content
SAU Community

Recommended Posts

Got my car dyno'ed today... its been a long time due, and with the issues i had at the recent G1 comp (ignition cutting out) i took with me spares of everything, AFM, CAS, Ignitor etc to swap it over.. but it turns out that the ECU is a bit on the dodgy side

I always thought i had a stock map on my ECU.. but turns out that its been remapped in Japan, whoever did it, certainly likes their taste for fuel, as throughout the whole midrange (4000 - 6000) rpm the fuel mixes were off the scale and mega rich (off the scale being lower then 10:1) Couldnt believe it and neither could jeff... so he went to work taking out all the fuel, adding some timing and so forth. Took a few runs and due to some weird as ECU related issues, we wasted a lot of time and chips and so we were cut short on the dyno time.

My main goal was to increase the midrange torque and so forth, i wasnt really fussed about the top end power as much, as i was happy with that and i didnt want to run anymore boost then i already was. So with the changes to the map we were able to get phernominal torque out of the RB20 around the 4500 rpm range, the KKR430 comes on HARD now and basically the torque curve in 3rd gear is near verticle, in 4th it is equally massive. several times the car tried to climb out the dyno... crazy!

Final figure was 197.4 rwkw's on 1 bar boost, Runs were done in 4th gear.

I have taken pics of the dyno graph, however Jeff is going to be changing this in the very near future to smooth out those midrange mixtures some more.

All in all im very happy with the results.. On the road it basically translates to massive wheel spin when i floor it in 3rd and even more wheelspin when i grab 4th :)

Big thanks to Jeff from The Speed Lab for persisting through all the related ECU and chip drama's and Steve from jazmac for helping out and the Dyno hire.

1003854cm2.th.jpg

Power run showing AF mixes in 4th gear

1003855iv3.th.jpg

Pink is 3rd gear and Red is 4th gear... Keep in mind that power and torque figures are accurate in 4th gear...

Link to comment
https://www.sau.com.au/forums/topic/129817-dyno-run-with-kkr430-turbo/
Share on other sites

Do you want an honest opinion or a pat on the back?

PM me if you want the honest opinion off the forum.

Pat on the back follows;

Looks like a good value for money result.

:D cheers :stupid:

Edited by Sydneykid

From thier own website

KKR-430

Intended for 2.0–2.5L engines, this turbo features a T3-size exhaust flange. This makes it an ideal upgrade turbo for RB20DET and RB25DET engines*. Rated at 430hp, it is suitable for drift and street performance applications, where minimal lag is preferred. It uses a 2.75in V-band flange for the exhaust outlet (V-band and flange included).

Tested on an RB25DET at Panther Aftermarket, it produced 230kW at the wheels with only 11.5psi of boost. The standard internal wastegate is designed to hold 11–12psi.

230rwkw/11psi/rb25 - doubt it

Do you want an honest opinion or a pat on the back?

PM me if you want the honest opinion off the forum.

Pat on the back follows;

Looks like a good value for money result.

:D cheers :stupid:

thats just it, people feel the need to make opinions because its a cheap turbo and bush bearing, but at the end of the day it makes power and it costs bugger all doing it.

wheelspin in 4th with 197rwkw?? Do you have granite tyres?? :D

I was thinking the same thing. I spin in 3rd when planting my 400rwhp datto with 195s and stupid camber......but with 350rwhp I hardly ever did...not to mention the 280rwhp you have. No offence but whats the go?

Get those af ratios to 12 and youll be making more poke.

Well done but do as above and enjoy more power.

I was thinking the same thing. I spin in 3rd when planting my 400rwhp datto with 195s and stupid camber......but with 350rwhp I hardly ever did...not to mention the 280rwhp you have. No offence but whats the go?

Get those af ratios to 12 and youll be making more poke.

Well done but do as above and enjoy more power.

wheelspin is provoked by torque delivery being so sudden rather then peak power figure. and yeah the tyres on the back were a bit average, 235/45/17's however poor quality rubber.

I think that's because it's accelarating from a low speed. If he was at say 4000rpm in 2nd gear even throttle then planted it, the boost would come on quickly after a second or so whereas with a bb turbo it would be more gradual resulting in less wheelspin.

That's how it looks to me anyway. I have driven a car the same as mine with a KKR turbo and that's what it feels like.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
    • Hi Everyone I am from West Pennant Hills in NSW. Been too busy until recently to attend to my RB25DET Series 2 engine until recently. I am planning to stick it into the S15 shell at this stage, unless a nice SR20DET turns up... For now, i am going to try and get the RB25 running and working well then decide what gearbox to use. My preference is to retain the SR20DET  6 speed gearbox and tail shaft to retain as much and least modifications as i can avoid. I am an old guy and won't be doing any heavy drifting so i don't need a bullet proof gearbox Does anyone have experience with starting the RB on a stand? I got everything setup as much as I can with the info i can find... endless searching and videos on Youtube I would be great to get some pointers Cheers Songo
    • Hey all, Recently have had my s1 r33 gtr serviced and noticed my coolant reservoir was topped up to the max line. Took the car out for 1 yesterday and noticed today the reservoir is completely empty.  Any ideas? Radiator is full
×
×
  • Create New...