Jump to content
SAU Community

Recommended Posts

Hi,

I just wondering does anyone here know why there is oil leaking from the front half of the engine.....I have attached some pic...if anyone knows what is wrong please tell me....

Also there is heaps of white smoke coming from exhaust, a pair of new Tomei turbo have just put in....

post-14837-1155409553.jpg

post-14837-1155409606.jpg

post-14837-1155409660.jpg

Link to comment
https://www.sau.com.au/forums/topic/130004-rb26-problem/
Share on other sites

I think it is too but the hose looks like it isn't on properly I thought it would have to go right up and over the raised section on the metal pipe. Maybe look at a new hose and clamp?

the metal clamp with the hose should be pushed way further up on the other side of the lump on that metal pipe.

Link to comment
https://www.sau.com.au/forums/topic/130004-rb26-problem/#findComment-2405346
Share on other sites

compression test was all fine....All first five was 157 and the last one was little bit lower~~~

um....still cant think of what is wrong~~

That line is the turbo oil drain back to the sump if it is blocked it is possilbly the reason for both problems - ie too much oil pressure from a blocked return pushing the seals back in the turbos and pouring oil into the exhuast.

Link to comment
https://www.sau.com.au/forums/topic/130004-rb26-problem/#findComment-2406260
Share on other sites

then that only explain the smoke....how about the oil leak??I used a better clamp to hold that pipe nice and tide now...still got the leak....I am going to do the front crank seal tonite...will see how it goes..

Link to comment
https://www.sau.com.au/forums/topic/130004-rb26-problem/#findComment-2408101
Share on other sites

did you extend hose right over the lip on the pipe so it seals properly when you changed the clamp? and did you clean up all the oil thats there at the moment so when it does leak again you can be positive of where it is leaking from exactly just incase it is coming from somewhere else.

Link to comment
https://www.sau.com.au/forums/topic/130004-rb26-problem/#findComment-2408270
Share on other sites

then that only explain the smoke....how about the oil leak??I used a better clamp to hold that pipe nice and tide now...still got the leak....I am going to do the front crank seal tonite...will see how it goes..

If that hose is under pressure it is more likely to leak if it was not designed to be under pressure as I believe it is not. Some of the oil gets pushed into the exhaust and some gets pushed out past the hose.

Link to comment
https://www.sau.com.au/forums/topic/130004-rb26-problem/#findComment-2408827
Share on other sites

For anyone that have time tonite......anyone want to come over to my place to give me a hand to find out what is wrong with the engine??I am in Brown Plains, south side of Brisbane...I am going to change to front seal first will see how does it goes...

If anyone is unterested to helping me...sms me on 0433 473 088, then I will sms you my address

cheers

Link to comment
https://www.sau.com.au/forums/topic/130004-rb26-problem/#findComment-2408995
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Im loving this thread. I have a g35/900 t4 split 1.00 ar going on my rb30/25 with 9:1 and 264 cams. its drive by wire and with vct i think it should spool nicely. I have the 8speed gearbox on the floor ready to go on so full boost changes will be a thing if the tyres can deal with it. it should always be on boost
    • The trouble for me is the automatic takes away so much from it. And the E92 has hydraulic power steering. Even after putting in an LSD you're looking at re-mapping the xDrive to be more like a Skyline which is just a lot of effort for something that is supposed to be easier and cheaper. I consider the E92 335i 6MT to basically be the obviously superior car to something like an R34 GTT. Half the price out here, the N54 makes so much more power so easily, is a far more refined car, etc. You do have to deal with the nightmare of the N54's foibles vs the B58 which is comparatively miles better and if a turbo does fail it's only one of them vs two and a lot less pipe spaghetti.  996 or 997 Turbo has the AWD system mapped like a Skyline. Basically always RWD unless engaging the front axle makes sense. A coworker let me drive his 997.2 Turbo 6MT and it's absolutely tremendous. I don't think I'd want more power in a street car.
    • I'm purely suggesting, what every multinational business out there presently does! And the world governments all day it's legal.
    • That's awesome. Fully serviced/full log book history for one of those cars is super rare from what I know. With JDM's like Skyline's, Supras, are quite hard to find one with full log book history. S15's seem to be somewhat of an exception, at least the spec s australian delivered models.
    • Hey all, It's been a bit since I have been able to update.  I pulled the fuel pump, first off it was a "universal" pump and the strainer was very clogged, and it was folded over on itself.  I replaced the fuel pump and all is well....  No more stalling.
×
×
  • Create New...