Jump to content
SAU Community

Recommended Posts

Will it fit?

Need stanard suspension fitted to car to licence - cant find any stock 34 GTR suspension to borrow - but have got some gtt available - want to know if it will work?

I'm suspecting no.

Daniel

Link to comment
https://www.sau.com.au/forums/topic/130178-34-gtt-suspension-into-a-34-gtr/
Share on other sites

r34 gtt and r34 gtr and r33 gtr suspension are interchangeable

tho the front suspension of the gtr are a bit shorter than the gtt's

i have r34 gtr teins in my gtt (well im pretty sure coz thats what the guy had them off)

the front is max height and it still looks lowered

pic attached

eric.jpg

Edited by ecl

So is that a definative YES?

r34 gtt and r34 gtr and r33 gtr suspension are interchangeable

tho the front suspension of the gtr are a bit shorter than the gtt's

i have r34 gtr teins in my gtt (well im pretty sure coz thats what the guy had them off)

the front is max height and it still looks lowered

pic attached

eric.jpg

Will it FIT, yes.

Is it suitable, NO.

But you won't be driving it much, so it doesn't matter.

R33GTR standard suspension would be better.

:rofl: cheers :P

Edited by Sydneykid
is it coil overs. if it isnt. just go over them with a presure pack black :O

spray it black,send it back ftw..

R34 GTR shocks are silver :)

Anyway I will have a set of standard suspension available soon after my new stuff arrives from Japan. Let me know if you solve your problem in the meantime.

R34 GTT suspension may fit but technically it's not standard so if they let you get away with that and comply it they may as well let you get away with any random suspension in it.

Well I got some GTt suspension - will try and put it in tomorrow - I will let you know how I go.

One more question - how do I take the back struts out - through boot or take back seat out?

Thanks again guys

Daniel

Well I got some GTt suspension - will try and put it in tomorrow - I will let you know how I go.

One more question - how do I take the back struts out - through boot or take back seat out?

Thanks again guys

Daniel

Back seat and rear parcel shelf out.

:) cheers :)

Well just to clarify - it does fit.

Back sits alittle low(but still acceptable).

Front is bloody high - just like stock - looks ackward.

Drives like shit - but is fine for a short distance.

Car is now licenced .

Thanks to all for your help.

Daniel

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...