Jump to content
SAU Community

Recommended Posts

JMS+R33+drift.jpg

JMS+R33+drift+2.jpg

JMS+R33+drift+1.jpg

JMS+R33+drift+3.jpg

JMS+R33+drift+4.jpg

JMS+R33+drift+5.jpg

JMS+R33+drift+6.jpg

this is how its done,I would change the front bar but with plenty of dish it looks fat as f**k...what are they 10s, 12s??

though unfortunately i think alot of troublesome guard work was involved >_<

I'm not sure if I've posted in here. But here is some anyway. Some are old... some are new... most are average cos I can't take photos

16800418378785496741321.jpg

img2113yi.jpg

yeah it doesnt seem to sit as nice as your old wheels did, maybe its different in the flesh i dunno..

these photos is where it sits just right IMO anyway , not sure if the first pic is lower than the second

..If you wanted it to look more low just get different skirts..put your old wheels back and get an Explosive kit Blags..

Top pic is: 17x9.5 -2 front 18x.10.5 +15 rear

Second pic is: 17x9.5 +18 all round with 245/40

New rears are: 18x10.5 +-0

blags quest for the perfect fitment, you could write a thread about it..lol..

I dunno but im more of a tuck than a poke man so my opinion may be different to yours and others

I think rim should be close as possible to flush with guard, tyre size is determined by what will then fit under the guard without too much stretch. And stretch front and rear should be even..having a rear stretched more than the front looks unbalanced..and rather silly IMO..camber should also be close as possible to even front and rear..

in your case from a stance only view, I think the 17 fornt 18 rear worked really well and what it needed was a better bodykit to make it all work without the need for excessive lowering..

i havent been to stance nation for a while so maybe im outta touch :P

blags quest for the perfect fitment, you could write a thread about it..lol..

I dunno but im more of a tuck than a poke man so my opinion may be different to yours and others

I think rim should be close as possible to flush with guard, tyre size is determined by what will then fit under the guard without too much stretch. And stretch front and rear should be even..having a rear stretched more than the front looks unbalanced..and rather silly IMO..camber should also be close as possible to even front and rear..

in your case from a stance only view, I think the 17 fornt 18 rear worked really well and what it needed was a better bodykit to make it all work without the need for excessive lowering..

i havent been to stance nation for a while so maybe im outta touch :P

Yer I guess I could do a nice little write up haha.

It all depends on what you like. I was running xd9's about 2-3 years ago and ever since I continued to get more and more aggressive sizing and offsets. I went back to running 17's all round with sticky rubber because I am getting into a bit of track work.

17's front and 18's rear worked a treat... there was no way you would see a 33 as low as mine.

Going back to a less aggressive set up now and probably staying that way....

Stay tuned for more photos ;)

while on the tyre/ stance subject. im about to get some new tyres, currently running 235 /45 and if i run a 5mm slip it sits just right, would i be right in assuming i could go a 245/40 all round in the same tyre?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...