Jump to content
SAU Community

Recommended Posts

Did you make the spoiler? or if not where is it from?

Bought it, pretty much just a piece of sheet metal that a wrapped in CF vinyl. Then its a case of taking 20mins to fit it with pop rivets. Few pic's floating around SAU if it and me getting it and installing it

  • Like 1
  • 2 weeks later...

Lovely, what offsets and tyres are you running? Any guard work?

Looks incredible, great dish happening there.

18x9 +20 plus a 20mm bolt on spacer front & 18x10 +18 rear. Tyres are215 40 18 front & 225 40 18 rear & I have rolled the rear gaurds but the fronts have been rolled & pushed out a little.

18x9 +20 plus a 20mm bolt on spacer front & 18x10 +18 rear. Tyres are215 40 18 front & 225 40 18 rear & I have rolled the rear gaurds but the fronts have been rolled & pushed out a little.

Wish I could run wheels with those figures on my GTST but no one in my area does decent guard work. Thats a fair stretch on the tyres.

Plenty of camber I'm guessing?

Edited by GotsWapan

Removed my plastidip and cleaned up my wheels today. Also bought some centrecaps that came in a machined finished, gave it a lick of 2k black with clear and put sticker ontop. black with embossed logo so the machine finish comes through. looks tidy imo. also some neochrome steel lug nuts. Just needs gloss black valve caps to finish it off.

post-105492-0-12199000-1376207621_thumb.jpg

post-105492-0-74014600-1376207626_thumb.jpg

post-105492-0-84030800-1376207633_thumb.jpg

post-105492-0-74515200-1376207638_thumb.jpg

Removed my plastidip and cleaned up my wheels today. Also bought some centrecaps that came in a machined finished, gave it a lick of 2k black with clear and put sticker ontop. black with embossed logo so the machine finish comes through. looks tidy imo. also some neochrome steel lug nuts. Just needs gloss black valve caps to finish it off.

the sticker on your boot is entirely appropriate

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...