Sticky Dave Cracks 360 Today

[Swiper the Fox]

R33 GTS-t with RB25 and a HKS TO4-Z

pump gas at 25psi and 11.8-1

poor old walbro in-tank pump is outa flow

so its time for a fuel pump upgrade

and 28PSI....lookout 400

well done mate

P.S. this was done with a shitty MicroTech rotary ecu!!

[180bfj20det]

Microtech's arent that bad!!!!! Walbro's are though.

With that gold turbo and 25 psi are we making 360rwkw or 360rwhp? I hope the former.

Dyno sheet?

What has been done on the engine?

What type of ign advance are you running on 25 psi?

Sounds good.

R33 GTS-t with RB25 and a HKS TO4-Z

pump gas at 25psi and 11.8-1

poor old walbro in-tank pump is outa flow

so its time for a fuel pump upgrade

and 28PSI....lookout 400

well done mate

P.S. this was done with a shitty MicroTech rotary ecu!!

[Swiper the Fox]

Microtech's arent that bad!!!!! Walbro's are though.

With that gold turbo and 25 psi are we making 360rwkw or 360rwhp? I hope the former.

Dyno sheet?

What has been done on the engine?

What type of ign advance are you running on 25 psi?

Sounds good.

not enough load points on a MicroTech for my liking

yeah its kilowatts

not my car so no sheets

pretty STD donk bar forgies for safety (25000klm ago)

no idea

p.s. is running plazmaman plenumn and a bezerkley throttle body

[Morgs]

Go the T04Z

[Swiper the Fox]

Go the T04Z

nice all-round turbo...good comprimise between street and strip.

i can see this set-up breaking the 400kw barrier without too much drama on pump gas.

then we will try some C16

[r33_racer]

when does it make full boost? I dont know much about them, but how laggy are they? because everyone seems to be going for them and they seem to be making good big figures.

[shonen]

Hmmmm very interested in the power curve....

Love to know how the T04Z spools on the RB25...

Any specs on the actualy turbo ?

ie A/R etc ?

[Blitz]

Hmmmm very interested in the power curve....

Love to know how the T04Z spools on the RB25...

Any specs on the actualy turbo ?

ie A/R etc ?

I believe its the HKS TO4Z with the .80 exhaust housing but Paul can confirm this.

I would have thought the .61 (?) exhaust housing would be better on an RB25

[shonen]

I believe its the HKS TO4Z with the .80 exhaust housing but Paul can confirm this.

I would have thought the .68 (?) exhaust housing would be better on an RB25

0.61

[R31Nismoid]

being the Z is bigger than the little GT30's... i'd say 4500rpm or above

[r33_racer]

sweet thats not too bad for the rb25, and then rb30? Perhaps a 1000rpm earlier? I found that to be the case with the GT35/40.

Just thinking of alternative turbos for the race car which might have abit more midrange/top end.

[2rismo]

Well done "Sticky" !!!

Did you make Paul wet his pants on the drive home? I hope so!

Adrian

[Blitz]

0.61

Typo - I was a little under the influence last night

[Swiper the Fox]

here's the dyno graphs

http://www.skylinesaustralia.com/forums/in...id=2438960&