Jump to content
SAU Community

Changed My 33 Climate Control Lights To Blue(pics)


Recommended Posts

  • Replies 75
  • Created
  • Last Reply

Top Posters In This Topic

mine were monza triple LED's, so they have the 3 seperate LED's on top

justins were normal single style led's and the spread of light in his cluster is EXACTLY the same as in mine

got a link/pic of your LED's?

Yo Tracid that looks AWESOME!!!

Yeah i got cheapies, i think they were around 2 for 12 or 15 bux like yours DEZZ.

With the ones u got tracid do u need to solder a resister for them to work that good? Or u talking about he cheap ones? I reckon u and dezz need to whip out a nice camera and swap em over with some b4 and after fotos :laugh:

Yo Tracid that looks AWESOME!!!

Yeah i got cheapies, i think they were around 2 for 12 or 15 bux like yours DEZZ.

With the ones u got tracid do u need to solder a resister for them to work that good? Or u talking about he cheap ones? I reckon u and dezz need to whip out a nice camera and swap em over with some b4 and after fotos :laugh:

heheh Justin and I have ordered some of the 1's that Kon's shown us in his supra dash...when they get here we'll slap em in, but i'll try to get a decent before photo (my cluster always looks worse in the photos than it does in real life)...if these 1's that kon's shown us work, then we can safely say its the type of LED and not the different clusters :rofl:

when you say with the same LED's (in the white pic), can you change the colour of them or something? sorta like those ones that go from green to orange or whatever...

How did you black out the red/yellow line when you had the blue ones in??

when you say with the same LED's (in the white pic), can you change the colour of them or something? sorta like those ones that go from green to orange or whatever...

How did you black out the red/yellow line when you had the blue ones in??

nah sorry what i meant was that they r the same type LED's from the US supplier

and about the yellow/red not coming through its just how it is, the yellow/red doesnt let the blue light through though if i turn highbeams on it does

Edited by TracidTrax
these r the ones i bought, c how they have 4 LED's facing all direction's?

WLED-x5_mm.jpg

http://www.superbrightleds.com/specs/bulb_specs.htm

Suk LEDS...looking for ones like these for ages...T10s by the dimentions...These already have the resistor and are pretty much a direct replacement in the holder...might need some cutting of the wedge, can u confirm??

Ah yeah I know what you mean, howcome it works when you put the highbeams on though?

i think its cause when i turn on the highbeams it emiitts the standard white light and the white goes throught the yellow/red tacho lines

Suk LEDS...looking for ones like these for ages...T10s by the dimentions...These already have the resistor and are pretty much a direct replacement in the holder...might need some cutting of the wedge, can u confirm??

yep theres no need to solder resistors to these ones or cut anything to size. Just take out the stock bulb from the wedge and replace with LED

damn $10 per LED :D

how many do you need to replace all the ones in an R33 dash??

5

they're really not that much more expensive than the ones you buy at autobarn...$14 for 2...so $7 each or $10 for 1... not much difference :O

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...