Jump to content
SAU Community

Recommended Posts

theres always a bit of noise, when moving the steering wheel it is loud, when at full lock it is louder.

This happens when the car is moving or not. I'm pretty sure its the power steering pump, can ya fix em or do i have to get another one ?

In the Information and technology industry the first thing a tek will as is for you to explain what it is and is not doing in more detail. I see no resin why this shouldn’t be the case here.

Please what kind of noise is it making?

Squealing, squeaking, grinding or another sound I have not covered here or maybe a few of the sounds all together?

  • 3 months later...
Yeah it was just low fluid level. Very embarassing post !!!

Good to see it was just fluid, unusual that the HICAS light never came on???

Was going to say if it was the pump try make a distinguishing mark on the pump so u can tell if it is a new pump or just your one recoed, seen it done before charging for a new pump & the old pump has just had a seal kit put through it.

Give u a idea your looking at around $50 for a seal kit & about 1/2 hr to a hour to pull the pump down & rebuild it, so say $150 - $200 all done, with new pump say around $450 - $500...

Some thing to keep in mind... :P

how about this?

the hose coming from the bottom of the power steering fluid reservoir is always wet. i noticed this on alot of r33's. funny thing is the fluid level has never dropped. what's that about?

how about this?

the hose coming from the bottom of the power steering fluid reservoir is always wet. i noticed this on alot of r33's. funny thing is the fluid level has never dropped. what's that about?

Had the same thing with my old 33, fluid would leak out the bottom hose and fill up the surrounding rubber sleeve. Ended up just getting new clamps and she was all sweet.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...