Jump to content
SAU Community

Help Wildcat Out

Wildcat

By Wildcat,
in Four Door Family & Wagoneers

 Share

Recommended Posts

Wildcat Grand Master

Wildcat

Posted
  • Author
Posted (edited)

hes well looked after he got satin sheets and all the works :/:(

And i whipped his ass and he had to do the food shop on his own..so we all know who is in charge in this relationship

Edited by Wildcat
66yostagea Grand Master

66yostagea

Posted
Posted
Hey Wildcat, hyperdrive found that my rear wipers motor for the water spray is the wrong one :/ (it wasn't working, and still isn't :huh:)I have no idea why there is a wrong motor in there.

When my S1 arrived the rear washer did not work. The fronts were fine and the same pump is used for both.

The line to the rear wasblocked. You can get to it by removing the rear cover and the rubber gromets in the body and the tailgate. Disconnect the line and pump through and clean nozzle.

If that doesn't clear it and the pump motor works it would have to be the solenoid that opens the pathway for the water, or the line is blocked closer to the pump I have not got a clue where the solenoid is at the moment, but will search if you need more info.

Cheers 66yo. :):nuke:

66yostagea Grand Master

66yostagea

Posted
Posted

I think I have stuffed up.lol

I checked again and it seems like there are two motor sounds when both washers are on together. Check and listen. Ifyou can hear the motor work when it should the it could be a blockage at the rear nozzle.

Its quite easy to get to the line via the cover and grommets in the back .

Cheers 66yo :nuke::/

:huh::)

Wildcat Grand Master

Wildcat

Posted
  • Author
Posted
Hey Wildcat, hyperdrive found that my rear wipers motor for the water spray is the wrong one :) (it wasn't working, and still isn't :huh:)I have no idea why there is a wrong motor in there.

Well im lucky enough that the water spray still works and comes out like its suppose to...the wiper just doesnt move...will have a closer look tonight or tomorrow when it eventually stops pissin down with rain :nuke:

66yostagea Grand Master

66yostagea

Posted
Posted
Well im lucky enough that the water spray still works and comes out like its suppose to...the wiper just doesnt move...will have a closer look tonight or tomorrow when it eventually stops pissin down with rain :mad:

The PDWR got me. Its pissing pickhandles here and we love it. Costs $120 for a load of water. :rant::O

Ska Grand Master

Ska

Posted
Posted
oh mister tangles :D i have faith..i just like to be independent and being a girl and all i would like to be able to do things that men think only they can do :mad: but of course hubby can look at it and fix it and i can watch ;):(

You like to watch....................... eh :huh:

hes well looked after he got satin sheets and all the works :mad::P

And i whipped his ass and he had to do the food shop on his own..so we all know who is in charge in this relationship

OUCH!!!!!!! Damn you ARE WHIPPED Mr GTST!!!!!!!!

munchstagea Mentor

munchstagea

Posted
Posted

While we are talking rear wipers...

post-8679-1157105975.jpg

Take a look at the length of mine! I have the fuse removed so it can't be turned on, if it is it just tries to smash the squirter nozzle off tailgate, pretty funny but a little scary at the same time. The wiper arm has Toyota stamped into it so it's wrong in more ways than one!

Anyone have a spare rear wiper arm? Or one they would be happy to part with? I will post a WTB in the trade section but will not be holding my breath...

Cheers

Luke

IMPORTD Grand Master

IMPORTD

Posted
Posted

Far out Munch, thats a bit big... although I have to agree with who ever put it on... piddly little wiper on the back :P

66yo I think the problem is with the motor that runs the water, its the wrong one, The back wiper works and the fronts work with the washers.

66yostagea Grand Master

66yostagea

Posted
Posted
Far out Munch, thats a bit big... although I have to agree with who ever put it on... piddly little wiper on the back :P

66yo I think the problem is with the motor that runs the water, its the wrong one, The back wiper works and the fronts work with the washers.

I'mTOTALLY confused.

Is it correct to say (1) The front wipers and washers work

(2) The rear wiper works but the washer does not

(3) The rear washer works but the wiper does not

(4) Nothin' f**kin' works?

(5) Caus its pissin pick handles and I forgot to change the HW from solar to electric

we have all had to have cold showers and its buggered my night life.

(6) And if thats not enough the boys and I, successfully fitted a new water pump and

timing belt into a 180.

(7) God is good to NISSAN drivers.

Cheers 66yo. :D:D

CruiseLiner Mentor

CruiseLiner

Posted
Posted

how can the rear window washer motor be wrong? surely any washer motor will work with the 2 wires connected. i got both washer motors sitting in my garage doing nuthin (cant fit washer bottle with cooler piping), but i might need them later on. how about buy a new one stagea girl from nissan? they wont be much $$$ i'd imagine.

Wildcat Grand Master

Wildcat

Posted
  • Author
Posted

Yes it was a very easy job...(for the hubby) :laugh:

Was just a matter of pulling the cap off the wiper arm and tightening the nut... :laugh:

Little embarrasing after all that worrying to find that it was about a 5minute fix job..but at least now i have a working WINDOW WIPER :laugh:

:laugh::laugh: for everyones help and advice much appreciated

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      You Gregged a whole racetrack!?
    • GTSBoy
      R32 GT-R: 4WD Light Turns On After Bumps – Code 19 (ETS Motor) But No Issues Found

      By GTSBoy · Posted

      Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Bireley_32
      R32 GT-R: 4WD Light Turns On After Bumps – Code 19 (ETS Motor) But No Issues Found

      By Bireley_32 · Posted

      Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...