Jump to content
SAU Community

Recommended Posts

I used to run the adjustable Whiteline swaybar. A friend has a turbo conversion in his R32 GTS so gavce his my old swaybars to usem inlcuding the links.

Only now when i open the kit to install the new swaybars, they arent complete with all the bits needed, and actually use some of the old/std parts / links etc.

So can someone post up pics of the undersides of their cars so i can try and suss out the bits i need to buy?

Link to comment
https://www.sau.com.au/forums/topic/133413-swaybar-help/
Share on other sites

I used to run the adjustable Whiteline swaybar. A friend has a turbo conversion in his R32 GTS so gavce his my old swaybars to usem inlcuding the links.

Only now when i open the kit to install the new swaybars, they arent complete with all the bits needed, and actually use some of the old/std parts / links etc.

So can someone post up pics of the undersides of their cars so i can try and suss out the bits i need to buy?

From a Whiteline stabiliser bar fitting kit perspective;

The front bars, adj and fixed, both use the standard D brackets

The fixed bar uses the standard drop links

The adj bar uses special links (Whiteline supply them with the bar)

The rear bars, adj and fixed, both use the standard D brackets

The fixed rear bar uses the standard drop links

The adj rear bar uses special links (Whiteline supply them with the bar)

Let me know what you need, I have a few sets of links (no D brackets though) on the shelf for emergencies.

:D cheers :(

Link to comment
https://www.sau.com.au/forums/topic/133413-swaybar-help/#findComment-2472911
Share on other sites

It seems i need the D-brackets, and im not sure i have all the bushes needed to install the swaybars themselves? Need photos as its been 6 nmonths since i took off my old bars... photos would be good.

I may just get the wheel alignment ppl to sort it all out??? Id rather do it myself though as the expense of doing this rally that im gettign the car ready for is out of control :laugh:

Link to comment
https://www.sau.com.au/forums/topic/133413-swaybar-help/#findComment-2473680
Share on other sites

It seems i need the D-brackets, and im not sure i have all the bushes needed to install the swaybars themselves? Need photos as its been 6 nmonths since i took off my old bars... photos would be good.

I may just get the wheel alignment ppl to sort it all out??? Id rather do it myself though as the expense of doing this rally that im gettign the car ready for is out of control :(

Roy,

You should have two D brackets/bushes per bar. The photo is of the GT-R bars, but the droppers are much of a muchness. Gt-R set only comes with the rear droppers - the fronts just bolt up to the standard ones.

post-5134-1157687017.jpg

Link to comment
https://www.sau.com.au/forums/topic/133413-swaybar-help/#findComment-2473982
Share on other sites

From a Whiteline stabiliser bar fitting kit perspective;

The front bars, adj and fixed, both use the standard D brackets

The adj bar uses special links (Whiteline supply them with the bar)

Theres the ticket then, my fronts didnt come with any bushes. And the D brackets need a fiar bit of tweaking to fit the bush. After a lot of cursing i still want able to do them alst night. One hr sleep in over 2.5 days and i ran out of puff...ph and forgot to put wheels back on the car when dropping it off the jack.... oops ;) Very tired :P

Link to comment
https://www.sau.com.au/forums/topic/133413-swaybar-help/#findComment-2487605
Share on other sites

Well just rang Whiteline to order them and they are telling me the adjustable front swaybars use std links. Looking at the car that has my old swaybars they are aftermarket links and definitely not std. So something has chamged as Whiteline since i had my original ones fitted.

The adventures of doign things to crs when you have a deadline...time to try Noltec i think.

Link to comment
https://www.sau.com.au/forums/topic/133413-swaybar-help/#findComment-2488614
Share on other sites

Well just rang Whiteline to order them and they are telling me the adjustable front swaybars use std links. Looking at the car that has my old swaybars they are aftermarket links and definitely not std. So something has chamged as Whiteline since i had my original ones fitted.

The adventures of doign things to crs when you have a deadline...time to try Noltec i think.

Standard links on R33's and R34's, but Whiteline links on R32's. You want me to send you a link kit, I have a couple of spare sets? PM will do.

:huh: cheers :blush:

PS; I don't have any spare D bushes or D brackets though.

Link to comment
https://www.sau.com.au/forums/topic/133413-swaybar-help/#findComment-2489348
Share on other sites

My adjustable front bar didn't come with links for my r32. :3some:

Standard one seems to work alright, just need to to get off my arse one of these days and replace the rubber bush with some poly ones i have lying around

Link to comment
https://www.sau.com.au/forums/topic/133413-swaybar-help/#findComment-2490240
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just wanted to pop in an update on my setup. The CD swap has been great, I love the mazworks housing for the overall simplicity. I ended up sealing my trans tunnel with a thin sheet of aluminum reused some of the holes on the trans tunnel, and laid some window sealing EPS foam around the edges. Works great, really quieted things down and sealed up the car.  As for the power comment. Right now I am also running about 650whp. with the way the bell housing is attached to the face of the transmission I have zero doubts it would be fine, mainly because the input shaft and main shaft bearings are seated into the bell housing adapter. This means the load is NOT on the bolts to maintain the power, rather into he casing of the bell housing; Yes the bolts are doing some work there, but with both shafts locked in zero worries.  End of the day, the Mazworks solution is the easiest and safest. no need to take your trans to a shop to get milled perfectly, it fits with minimal clearancing, and you can use all your existing clutch and flywheel.  Driving wise the CD has been great compared to the big box, I'll probably swap my final drive at some point. The serial 9 shifter is gooooood, my only qualm is how tight it is, it takes a fair bit to get use to, 5th and 6th are a bit eh/hard to find at times, but maybe I need re-adjusting, and I think my clutch master is very tired and needs a rebuild. 
    • If you are keen, have a look at my build thread. Car is for sale for the right money or straight swap for a F80 M3 LCI.
    • Welcome mate.  No point in over thinking it, buying any one of those cars you mentioned is not a smart or logical choice with the availability of many "better" (re price to performance) cars available to you.  The heart wants what the heart wants, buy whatever it leads you too.
    • Hey everyone! Im so grateful to be apart of this community and ill do my best to be apart of this. Firstly, i'm not disclosing my real name due to in real life circumstances surrounding my privacy and public image (sorry lol) Secondly, The only thing personal I am willing to share is that I'm from Sydney and a descendant of one of Sydneys largest mortgage firms. I got gifted my first ever car, a 2022 Porsche Cayenne and I love it to death. Ive been driving it for about 5 or 6 months now and honestly Im so grateful for my parents for gifting me this vehicle. However recently I've been working my ass off to afford my second car (which I need help deciding soooooo community help me out please?). Once decided, im planning to try modify it myself. Recent I've been thinking about getting a Skyline, particularly a 25GT or GT-V, yes I know overrated as hell, but I'm also considering a Chaser which I recently came to love. However my dream is to one day own a 180SX (So hard to find clean versions and im not really into importing).  Lastly before I send this off, I want to apologize if I sound tacky or pretentious. I try not to and want to genuinely learn from everyone and anyone. (Im no expert in this area) Thanks for reading!
    • I've got three stashed away but it's starting to get silly with the prices 
×
×
  • Create New...