Jump to content
SAU Community

Recommended Posts

thanks mate , apologies i realized after i posted you weren't charlie, my bad lol

the car i was looking up isn't the one in the avatar , its a friends ones , we were hoping to find the original colour , looks like that's evaded us again.

but thanks again or the info everything helps , much appreciated.

  • Like 1

thanks mate , apologies i realized after i posted you weren't charlie, my bad lol

the car i was looking up isn't the one in the avatar , its a friends ones , we were hoping to find the original colour , looks like that's evaded us again.

but thanks again or the info everything helps , much appreciated.

All good :)

What colour is your friends GTR?

As in just by looking it... Post a pic.

Better yet, just post a pic of the Blue Plate and show me here.

hi can you run this bnr32308955

VIN.jpg

is there anyway to tell if my motor has the upgrades oil pump and crank?

With the Oil Pump, have a look at it and check the part number on it.

15010-05U12 = Stock

15010-24U01 = N1

15010-RR580 = Nismo

The crank... Unless you know it's upgraded, have proof it's been upgraded, there is no other way unless you open up your engine to take a look.

All good :)

What colour is your friends GTR?

As in just by looking it... Post a pic.

Better yet, just post a pic of the Blue Plate and show me here.

VIN.jpg

that's the thing , no blue plate on it otherwise the colour would be on there like mine, its only got a green plate? this is the car below.

thanks mate

post-1164-0-08463600-1411270875_thumb.jpg

that's the thing , no blue plate on it otherwise the colour would be on there like mine, its only got a green plate? this is the car below.

thanks mate

attachicon.gifdutchgtr.jpg

I see... The Green Plate is the Compliance Plate...

Does it look anything like this below: (Example Only)

post-8515-0-30467700-1303888223.jpg

Should still have the VIN on it...

Or, take a look up against the firewall as it should be engraved on there: (Example Only)

IMGP0259.jpg

that's the thing , no blue plate on it otherwise the colour would be on there like mine, its only got a green plate? this is the car below.

thanks mate

attachicon.gifdutchgtr.jpg

Looks like just a custom paint job or someone tried to replicate Top Secret Japan Gold:

r331.jpg|

But it will never be accurate, as Top Secret do not specify a paint code for it and in the sunlight, it can look different in colour.

What colour is his engine bay?

engine bay is the same colour , we have tried looking inside doors inside rubber strips, boot ect cant find any trace of what it may have been originally.

but your right the paint looks custom , and yes the green tag "the compliance" is the only tag on there ill have another look at the vin on the firewall

but im sure its where i got that BNR number for you , its the only number on there?

engine bay is the same colour , we have tried looking inside doors inside rubber strips, boot ect cant find any trace of what it may have been originally.

but your right the paint looks custom , and yes the green tag "the compliance" is the only tag on there ill have another look at the vin on the firewall

but im sure its where i got that BNR number for you , its the only number on there?

I see, looks like the precious owner got a very thorough paint job done and did the whole lot.

In that case, check the Compliance Plate VIN and see if it matches with the VIN on engraved on the Firewall.

Post the VIN that is engraved on the firewall in here and see how we go.

And yes the Firewall will only have the VIN engraved on it.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If you mean the alarm immobiliser; theyre internal to the alarm itself which makes that difficult; I couldnt even see where he put it; its not in the same place as last time; but with all black wiring it might be very challenging to trace  I had someone turn the key for me as I know it only primes for a couple of seconds As my post above; I am getting no voltage to the pump at all; but I am testing continuity of the power line (SB) from the pump plug to the relay fine. As well as the negative from the pump plug to a 12V constant.    Yeah; he blammed the no start on a bad battery; said I needed to get a new battery and it'll start. Turns out the battery drained because the tail lights had been on for half the day during the install (the rubber cushion on the brake switch gave out while he was testing it as I have a picture of the car from that morning with the tail lights off..i've replaced that). The battery was turning over the engine just fine for a long time; but got low since lights were draining it so it was too low to test a start after he finished. I bought a new one on his advice...$250 wasted. My original battery charged up just fine and is healthy.    It was running perfectly fine when I messed up the old alarm (programmed out the remotes). He couldnt start it after removing the old alarm; my assumption is that when he unhooked it; he didnt bridge the circuit back when trying to start it. Its always been perfectly fine. The ECU swap and pump were 2 years ago. It's never missed a beat in that time. 
    • This is a big issue for me without the diff. I just have zero drive from the passenger side when drivers side has no traction. Bec's parents place has a crazy steep driveway with odd camber and I have never been able to get up. My bro-in-law's 130i with an (unknown brand) LSD gets up fine as does their dad's Hiace. My car stays at the bottom. We have other odd camber roads around here as we're elevated a bit and if it's raining I can get totally stuck around some hairpins. 
    • Yeah, I am super excited for this.
    • Was the car running before he touched the car?
×
×
  • Create New...