Jump to content
SAU Community

Recommended Posts

I am rebuilding a dead RB26dett from an Aussie spec R32 GTR

Was told that it had RS581 turbos 0.48 compressor 0.6 turbine

The markings are Garrett

AGR 121

A/R 60 M24 on the air side

and

Garrett .64 696-2 T695 on the exhaust side

The exhaust side also has

N5S

496

H5 on one turbo

and

N5S

482

H2 on the other.

They are steel turbines,not ceramic.

Any help with what they are would be appreciated.

Could they be R34 N1 turbos?

Frank

Link to comment
https://www.sau.com.au/forums/topic/133760-is-it-a-group-a-turbo-rb26/
Share on other sites

I am rebuilding a dead RB26dett from an Aussie spec R32 GTR

Was told that it had RS581 turbos 0.48 compressor 0.6 turbine

The markings are Garrett

AGR 121

A/R 60 M24 on the air side

and

Garrett .64 696-2 T695 on the exhaust side

The exhaust side also has

N5S

496

H5 on one turbo

and

N5S

482

H2 on the other.

They are steel turbines,not ceramic.

Any help with what they are would be appreciated.

Could they be R34 N1 turbos?

Frank

Hi, happy hunting :D, clicky clicky GTR TURBO

Hi, happy hunting :spank:, clicky clicky GTR TURBO

Thanks west

I've looked at that before.

I was told it was 06U00 which would make it a32 nismo

How do you work out the trim, housings etc.

I presume I have .64 and .60

which would make it a nismo GT lemans?

How do you tell. Is there a part no I can't find.

Frank

frank, they could be a number of things. there are a few different GTR turbos with .64 ex A/R and .60 comp A/R. HKS GT2530 is one. Nissan BNR34 GTR N1 is one too. either way they are a good thing so dont worry which exact type they are. just use them!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...