Jump to content
SAU Community

Recommended Posts

hi just a quick question , i have a skyline r33 gtst ,with front mount ,3 inch exhaust, and a CENTRAL 20 ECU??? any information on this ecu would be appreciated . i am looking at doing more mods (high flow turbo, bigger injectors,etc.) i am after 250 rwks and need to know is this ecu up to the task or should i get an apexi pfc. cheers!

Link to comment
https://www.sau.com.au/forums/topic/133858-what-computer-is-this/
Share on other sites

central 20's a tuning house in japan. Its just a stock ECU with some tweaks to suit your car (might be something as simple as a speed limit removal or fuel cut removal or it could be a whole new fuel map). Anyways, you'll need a full retune if you're goin with those mods to get the most out of them. If its retunable, and you can find someone to do it, use that. Otherwise turf it and get a PFC. Its not worth anymore than a stock ECU... actually might be worth less, coz the only use anyone will have for it is if they have the exact same mods as your car.

http://www.central20.co.jp

cheers mate yeah it runs really fuelly and has no speed limiter and rev limiter hits 8000rpm, got a dyno at uas and bloke said he doesnt know what it is and you wont find any one to tune it so i might have to go with power fc

send pics to dr drift and ask him if he can retune em (from memory I don't think so)

but yeah, so much easier and better to go with PFC.

Sam retuned my C20 ECU and he said that it was the first one he was successfully able to remove the chip.

Can do, just not yet, I have an eprom ECU of my own for live tuning, and just need to get hot of the hardware to tune the H8/534 processor style chip to burn the map onto when we're done.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drilled the rubber out on a slow speed and it didn't catch much at all. Probably only half a dozen holes was enough to shred the rubber and it dropped off easily leaving the inner sleeve behind. Will tackle that later
    • I havent bought a manual cover for the dash yet and no cluster change, won't bother me too much, I just need to get that auto box gone, manual in! I miss my manual. 🤪. We started last weekend and managed to get the box out. Planning to start putting it in this weekend and then order a single piece tail. We were super careful to take time and not damage anything. It's my first time working under the car.  With my S15 mainly worked in the bay. This time, it was a headache because of three or four bolts only. They simply didnt want to leave thei homr and the one securing the tailshaft, another above the GB, and the one securing the lipstick was a shit. Mates mate, Davo caught fire 🤣, nearly opened his chest up with a grinder 🤦🏽‍♂️ and both mates nearly had a plate from the box land and slit their head open. Fun times. We all survived. Not the easiest working with limited access on jackstands. As I'm sure we can agree these are the memories which make us love our car. For all three of us, was an awesome weekend and Sunday 3.30am before tools down was a fantastic effort. I need to upload pics, but looks like it needs to be via Url now. We used to be able to just upload pics back in the day. It's been that long! 🤪 Im currently spraying rustoleum under body, not because it's rusted. It's super clean, but just so it's protected for the next 10 years. There was a few surface rust spots. Which pretty much wiped off with a 3M scourer.  Really impressed with how well the previous owner maintained it. Bank account went down so quick! Service, then GB - managed to get a spanking new 34 genuine box from Nissan. All the rest of the conversion parts from Kudos.  Went with a Nismo short shifter. New pedals and Exedy Clutch and FW. Ordered the Prp Rear Main Retainer kit which should arrive Friday and my first engine mod part just like I did with my S15 will be the Tomei Expreme Turbo Outlet. Already on order. It'll likely sleep next to me on a pillow during the coming months. 🥰 Last build was on my JET200GT profile and on SAU and Hardtuned I had documented the build. Planning to try to do that again. Brands feel scarce now. Wish we still had ARC and Apexi parts readily available. Exhaust - need some advice on this. I had an Apexi exhaust on the S15 and loved the tone. My mate had a HKS HP Silent on his 33 and suggested I go with that to avoid drone. I can't remember hearing an RB25DET running that so will likely need to wait for a meet or something to hear it.  Not after big power, just enjoy building it, and drivability with minimal negative attention.
    • Have a chat with Ben at Moore Performance or Jesse at JS Performance.
    • Thanks both. All good advice. Reminds me of drilling through stone wall for drainage pipe 😬 I'll let you know how I get on if I still have use of my hands afterwards 😅
    • Finally got shipping number for the intake and throttle body, shipped by UPS, so "should" be in my hands sometime next week, fingers fracking crossed
×
×
  • Create New...