Jump to content
SAU Community

Recommended Posts

Hi,

Yes i have read the threads!

What i want to know is what dump pipes you guys are running in your skylines?

Im currently looking at getting a 3in split dump but not sure whether to buy off ebay or get one made?

Does anyone no if the NPOWER ones on ebay are ok?

Cheers guys and gals

Link to comment
https://www.sau.com.au/forums/topic/134046-dump-pipes/
Share on other sites

im running at 2 in 1 dump/front. wish i had bought a split dump in the first place as from what i read its better. mine was bought bout 2 yrs ago from batmbl and his prices are still relatively cheap. I dont know why you would need to go custom unless you have aftermarket turbo - or if the a/m turbo didnt have dump included.

Link to comment
https://www.sau.com.au/forums/topic/134046-dump-pipes/#findComment-2486847
Share on other sites

I got a bell mouth (not split system) turbo to cat dump pipe, 3inch stainless steel, for $220 from JustJap on ebay. Top quality for the price I guess, and definately a power gain :)

Nozila, I know what you mean about rather buying a split pipe to start with, guess it comes down to finances at the time tho :( I figured myself $200ish was more than adequate, rather then twice that for a split system. Maybe one day down the track....................... :D

Hmmmm - anyone want a 3inch bellmouth stainless steel turbo to cat pipe? only 4000kms old ! :O:kiss:

Link to comment
https://www.sau.com.au/forums/topic/134046-dump-pipes/#findComment-2487104
Share on other sites

if you go custom, dont bother going stainless steel cause mild steel would just do the job just as good at a fraction of the cost - material wise that is. my dump/front (mild steel) has been on for years and its still in as new condition, same goes for my cat back exhaust (mild steel) in same condition i bought it in - over 4 yrs now not to mention how long its been used prior to me having it. just a thought.

Link to comment
https://www.sau.com.au/forums/topic/134046-dump-pipes/#findComment-2491285
Share on other sites

I've got a CES split dump - more pricey than other split dumps out there, but the quality really is fantastic.

Haven't used a standard dump so I can't compare the two, but the improvement the dump made when it was installed was great! Great guy to deal with over the phone too - helpful and prepared to spend some time on the phone talking/explaining about the product.

http://www.cesracing.com.au/

Link to comment
https://www.sau.com.au/forums/topic/134046-dump-pipes/#findComment-2491325
Share on other sites

GOT MINE DONE AT D & T

SPLIT DUMP TO JUST BEFORE THE CAT (CUSTOM) WITH NEW METAL RACING CAT.

SPOOLS UP ABOUT 500 RPM QUICKER AND YOU CAN FEEL THE INCREASED POWER

I had them do my exhaust system.

Back then they swore black and blue that the split dumps don't increase power or spool, they said it was a load of crap. I think it was more the case they hadn't done one before.

Ahh well now these gt35r internal gates are out I will be grabbing a new dump soon anyway. :(

Link to comment
https://www.sau.com.au/forums/topic/134046-dump-pipes/#findComment-2491406
Share on other sites

Cheers for all your replies guys, now im thinking of just goin mild steel instead of stainless.

Split dump and front pipe sounds the best!

Thanks

good choice, stainless aint worth the money. no one is going to squat under your car and go omfg, bling bling he has stainless pipes :woot: - or somethng to that effect. engine bay, on the other hand, is understanable.

Link to comment
https://www.sau.com.au/forums/topic/134046-dump-pipes/#findComment-2495883
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...