Jump to content
SAU Community

Recommended Posts

  • 4 weeks later...

i jsut came across it on Ebay so I ran a search on here to avoid reposting...

I figured the initial reactions would be like the ones posted above but has anyone actually tried these?? Or can give good (technical) reasons why these ARE crap?

just curious

i jsut came across it on Ebay so I ran a search on here to avoid reposting...

I figured the initial reactions would be like the ones posted above but has anyone actually tried these?? Or can give good (technical) reasons why these ARE crap?

just curious

Flow rates mostly.

Its hard to prove they are shit when theres so few specs available on them.

Information like this isnt useful:

"Will it generate boost throughout the entire rev range?

The Generation 1 will generate boost in all applications up to 5ltrs"

So if you have a 5L it might flow enough air to make 1 psi. Whoopy doo. It might be useful for low end gains which are always handy on a street car.

If I said i sold a "Universal" turbo id be laughed out of the industry since its well known that not just any snail will do. So why should this be any different?

make ya turbo skyline slower!!!! add's restriction in the air intake LOL

Can the Generation 1 be used with a mechanical turbo?

Yes, The Generation 1 can be placed between the intercooler and the inlet manifold, this will generate boost in the lower rev range and eleviate mechanical turbo lag.

Teeehehehehhehee

I want one for my wifes proton.. LoLz

i just noticed it said it spins at 25,000rpm ... now i dont know what the nissan turbos spin at especially since theres a shitload of different ones but i heard that turbos can spin up to 150,000rpm..

so if u could imagine the difference in air rates... also i noticed this

"Toyota Supra 3.0 will definitely buy again" ... must be a piece of crap that breaks easy cos why would u need another?.. haha

hehe hmm yeh re-reading it i found the line "up to 20bhp increaseguaranteed"... doesnt really make sense... is it at least 20 or 'up to' to?

still love to see some inbiased results... what if its like really awesome and we're all this dissing it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...